Tune resistor

[blaze_away]

I need to fit a green tune resistor to my 14CUX ECU on my 4.6 Chim.

I have a few of the correct resistors just need a plug connector.

So anyone know what the connector is called ?

FYI Here is the connection on the loom that the resistor plugs into.

[blitzracing]

Why not cut it off and simply put a screw block connector in there you can screw a resistor in directly?

[blaze_away]

blitzracing said:

Why not cut it off and simply put a screw block connector in there you can screw a resistor in directly?

Hi Mark. Sure could do that but would prefer to have a simple plug-in green 470ohm resistor.

[blitzracing]

What you do is is take your 470 ohm, and add a 3.3 k in series. Then solder a small switch across the 3.3 k so you can short it out, and lo and behold you can switch maps at ease.

[blaze_away]

blitzracing said:

What you do is is take your 470 ohm, and add a 3.3 k in series. Then solder a small switch across the 3.3 k so you can short it out, and lo and behold you can switch maps at ease.

Love it, as always......very clever