Black Diamond disc pads
Black Diamond disc pads
Author
Discussion

bluebottle

Original Poster:

3,498 posts

269 months

Thursday 9th June 2005
quotequote all
Just thought i would let you all know for reference that if you are intending to fit them to you Griff, the code reference they specify for the front pads in their catalogues are incorrect;

The PP-206 are for the 240mm discs only, You should quote PP-276 when ordering if you have the later 260mm discs.

Ballistic Banana

14,706 posts

296 months

Thursday 9th June 2005
quotequote all
Cheers Hamish, have added it to the Alternative parts list

BB

Mutant Rat

9,939 posts

274 months

Thursday 9th June 2005
quotequote all
Yes, thanks Hamish - I had a feeling something was wrong:
www.pistonheads.com/gassing/topic.asp?t=181081&f=8&h=0

bluebottle

Original Poster:

3,498 posts

269 months

Friday 10th June 2005
quotequote all
I took the plunge after much deliberation at the reports in here over the many and varied product options avilable and put BD discs and pads on all four corners at the begining of the week.
Did the usual check and double everywhere to make sure i had the right part codes and ordered from my local parts store (way cheaper than Motormania/Carpartsdata by nearly 40%) so when they didnt look right i couldnt go back to them as i gave them the codes. So i phoned Black Diamond direct, they sent me out the correct ones free of charge with no hassle - top marks to their customer service, if their brakes are as good as their excellant indirect customer service i will be very happy.

zippee

14,125 posts

263 months

Friday 10th June 2005
quotequote all
Same for me, very helpful chap at B/diamond, explained the problem and he's sending me a set out today.
I also highlighted the error in their fitting chart and he's going to get it amended.