E46 330d turbo 184 to 204

[kevburner]

Car done turbo on wAy home from passing mot , led foot on way home turbo seal gone , been like for a few years but as the misses drives it , it’s never really on full boost

I’ve got a turn from a 204 bhp 2260 , does anyone know what oil feed pipe I need , the 1 from a 204 ? Helix help me ?

[helix402]

I think the 184 pipe will fit but I put a new gen BMW 204 pipe on. You’ll need the turbo to intercooler pipe from the 204 too. My current thread should have most of the info. I bought a 204 bracket to mount the turbo pressure converter too. You can’t mount it the same as on the 204 but I found the bracket worked.

[kevburner]

Well that was a Long day !

Got the turbo on , that’s a tight fit , I took the manifold off in the end , as i doing the rocker over gasket as well

Anyone know the torque settings for the rocker cover , inlet manifold , injector clamps?

[helix402]

kevburner said:

Well that was a Long day !

Got the turbo on , that’s a tight fit , I took the manifold off in the end , as i doing the rocker over gasket as well

Anyone know the torque settings for the rocker
cover , inlet manifold , injector clamps?

Torques will be in here:

https://www.newtis.info/tisv2/a/en/e65-730i-lim/re...

The turbo is tight. I took mine out from below with the engine mount off.

[kevburner]

Thxs helix that was a great help

Got the turbo on , and intercooler pipe work for it ,

Rocker cover gasket done as well , parts of that was rock hard , glad I changed that now as it was fuked!

Injectors in , gonna finish it off tomoz

[kevburner]

shes alive

glad to say after 3 days of spannering , car has a new 2260 turbo , new rocker cover gasket, all air intake hoses cleaned , inlet manifold cleaned and installed with new gaskets

next job new front dampers and sort 5th gear lean out

theres life in the old dog , good for another 140k,

happy days