T-CUT AND BULLBAR

[tfauctions]

Can you t-cut the jago ? mines red and im wanted to clean it inside out when it arrives and want a good polish for the body work.

Also ive sorted my bullbar out but want to know the best bolts to use and where to find them, maybe b and q ?


Dave

>> Edited by TFauctions on Friday 10th June 12:40

[aquasigns]

Don't use normal t-cut. Get a specialist grp cut and polish from a chandlers. 3m do a good one.

Pete

[drseg]

i think theres something in normal t-cut that makes fibreglass go whiter oxidation wise - amonia perhaps
for a quick temporary shine use baby oil - yes i am serious works well till it rains

[tfauctions]

BABY OIL !!!!

I think i have some lying around the bedroom on my wifes side................whoooppsssss

Is the 3m polish for boats ? or is there a car version, im a little confused.

Cheers Guys

Dave

>> Edited by tfauctions on Friday 10th June 19:43

[mal666]

hi dave, if u refere back a few page's to thread
"help guys, what poilish do i need?"
should be of some help!!

Mal

[drseg]

yeah its for boats
fibreglass ones obviously
still gonna experiment with silicon based spray at sometime - probably when 42p baby oil runs out only fear i have with silicon is if i ever want to spray it silicon is a pig to remove
the proper stuff for cutting boats does remove some gel coat so be prepared for a bit of elbow grease
good luck

[okeydokey]

www.pistonheads.com/gassing/topic.asp?t=174195&f=56&h=10
Think its this one TF

[tfauctions]

Looks like its Auto Gylm for me then, should bring it up a nice bright red.

Cheers


Dave

>> Edited by TFauctions on Saturday 11th June 10:33

[little jago]

u want g7 faraclay for cars thats wots best to use i used it when i work fo vauxhall cars an its says if good for grp if u dont know ask a car shop

[techsec]

Bolts for your bullbar should be a minimum of 8.8 strength. I prefer to use 12.9's for most of my stuff.
Yes standard T-cut contains ammonia which is not good stuff for fibreglass gel coat.

>> Edited by techsec on Saturday 11th June 20:52