Bits and Bobs - Newark

[Club.Ed.TONKA]

Hi Guys

If anyone is interested I could bring the following used parts to Newark.

Pair of extra wide flat front wings and rear wheel arch extensions , fronts need some tlc , rears are in primer with fixing holes drilled but appear unused.

Fibreglass full width dash panel , some holes already cut.

Propshaft from pinto/4 speed set-up - 28" from tailshaft to diff flange.

Anglia? wiper assembly - spindles at 10 1/2 " centres motor presumed U/S but linkage/spindles complete.

Email me for pics/further details.

Please note these are the only surplus parts I have so no "wanted lists" please!

Due to space/time limitations I can only bring those parts requested by Wednesday night latest , so be quick , strictly first come first served , timewasters will be named and shamed on the 20th .......! :)

Cheers

Mark

[drseg]

those are the bits but who's bob?

[Club.Ed.TONKA]

A builder ?

[little jago]

yeah i will take buy or nick the wiper bits to make work propley lol

[trextr7monkey]

Add to list:
1300 cc crossflow engine believed done about 50 k miles head off for inspection purposes

escort 4 speed gearbox and short prop
1600cc sport flywheel starter ring and Borg & Beck clutch cover
Escort speedo /tacho rough says 62 k miles

2 x pre crossflow heads with new valves fitted
3 x old style timing chain covers with speedo drive
2 x 1600 exhaust manifolds
1 x 4 2 1 manifold
water pump
2 x 9"drums
Various sets of standard and over size Pistons, conrods in sets of 4 cranks and camshafts
1200 and 1300 heads

Will bring a few copies of build manuals too in case anyone hasn't got one yet
Free stuff:
also plan to cut some Jago Jeep key fobs on offcuts of engraving laminate if find enough time this wek!
Rocker box covers - most styles from a variety of engines we have half a dozen sitinghere doingnothing someone must want one!!

Looking for 14" Wellers with legal tyres
Will be down for weekend e mail for further info on anything

[joe-robo]

hi i'm intrested in the dash panel but i dont think i will be at newark. if you are willing to post it i will pay all cost etc etc just let me know via [e-mail]

thanks
joe

[Mister frosty]

Hi Mark

What are you wanting for the set of arches?

Might not want to fit them straight away but they may be a later styling 'tweek'.

[Club.Ed.TONKA]

Hi John

Sorry I have already promised them to Mal , just hadnt had time to update the post.

Mark

[Mister frosty]

No problem.

Just glad to see they will be put to use.

Still aiming to have the BLUE one ready for Harrogate.

Have fun at Newark all.

[joe-robo]

hi
i will be at newark afterall so how much for the dash? thanks