Mk. 2 Handbook

[Cerrion Steel]

Page 11 says that on screen 4 of the pod you can change the right hand side of the screen to show selected parameters magnified. Thus, you should be able to select to show, for example, oil temperature at the same time as revs.. To enter select mode, you press both function switches at the same time.

However - this doesn't work on my car. Does it for anyone else?

On page 38, it says the power steering level should be checked on the "reservoir cap/ dipstick". My car doesn't have a dipstick. Would I be right in thinking the fluid level is OK if you can see fluid in the bottom of the filler when the car is parked on the level?

Cheers,
Richard

[lady topaz]

Cerrion Steel said:

Page 11 says that on screen 4 of the pod you can change the right hand side of the screen to show selected parameters magnified. Thus, you should be able to select to show, for example, oil temperature at the same time as revs.. To enter select mode, you press both function switches at the same time. However - this doesn't work on my car. Does it for anyone else? On page 38, it says the power steering level should be checked on the "reservoir cap/ dipstick". My car doesn't have a dipstick. Would I be right in thinking the fluid level is OK if you can see fluid in the bottom of the filler when the car is parked on the level? Cheers, Richard

Hi Richard,
When I brought up the pod issue originally with Ben Samuelson, he did say that this revs and temp issue was another thing he was going to sort out with the engineers. I think its probably a software upgrade.

With regard to the steering fluid, since I lost the lot on the drive, when the dealer sorted it and refilled, the fluid was about an inch visible. It doesnt appear to be too critical like other fluids as I had to drive mine 40 odd miles with no fluid and it still steered ok.

Di

[Cerrion Steel]

Thanks, Di.