Light Bulb Change

[mrmop]

can anyone help me, and tell me how i change the main beam bulb on my Cerbera with non blended in headlight conversion and where I can get a replacement bulb, could do with this assistance prior to Le Mans trip this week.

Cheers

[cerber450]

mrmop said:

can anyone help me, and tell me how i change the main beam bulb on my Cerbera with non blended in headlight conversion and where I can get a replacement bulb, could do with this assistance prior to Le Mans trip this week. Cheers

Front wheel off and remove panel to access the bulb.
Give me a shout after 5pm if your having probs and I'll give you a hand.

[mrmop]

Cheers Craig, will have a go later, let you know if I need some assistance, where can I buy them any idea, would hafwits stock them ?

Thanks Craig,

BTW were are you staying In Le Mans

[DuncanM]

You don't need to take the wheel off .

If you turn the wheel to full lock out you will have enough room to remove the cover and replace the bulb .

Duncan

[cerber450]

mrmop said:

Cheers Craig, will have a go later, let you know if I need some assistance, where can I buy them any idea, would hafwits stock them ? Thanks Craig, BTW were are you staying In Le Mans

Yeah halwits should have some.

No longer going to LeMans had some little problems with the car again so I'm stripping it completely down and fitting all the new larger heads and the stronger pistons & rods so that is ready for the end of the month and some more racing!

[Extra 300 Driver]

You want H4 bulbs.

They are a standard fit.

[mrmop]

Thanks Guy's all sorted, after replacing the bulb it still would not operate, turned out to be a dodgy connection with the bulb connector.

Oh dear Craig, sounds expensive !

[cerber450]

mrmop said:

Thanks Guy's all sorted, after replacing the bulb it still would not operate, turned out to be a dodgy connection with the bulb connector. Oh dear Craig, sounds expensive !

I'd already started getting a spare together but wasn't going to put it in till after LeMans so all I've done is bring it forward.

[Mark Adams]

Craig - your new motor sounds worthy of it's own post! How about it?

[gazzab]

sorry to hear your engine needs work Craig. Is Andy at APM doing the work?