Shopping List of sorts!
Discussion
Here is my shopping list of things I need for my westfield SE before February!
- Smaller Steering Wheel (flat bottomed)
- Cycle Wings and Brakets to change from the swept ones I have at the moment!
- Aeroscreen (my new seats make the top of the current windscreen block my vision)
- Custom height roll bar (I've got that sorted out thanks to Plays-Kool!)
- Diff ratios sorted out as i am topping out at 70 in 4th!
So the reason for that lot is....I need to know what sort of prices I am looking at as I'm on a budget, of as cheap as i can get it!
Cheers
Graham
- Smaller Steering Wheel (flat bottomed)
- Cycle Wings and Brakets to change from the swept ones I have at the moment!
- Aeroscreen (my new seats make the top of the current windscreen block my vision)
- Custom height roll bar (I've got that sorted out thanks to Plays-Kool!)
- Diff ratios sorted out as i am topping out at 70 in 4th!
So the reason for that lot is....I need to know what sort of prices I am looking at as I'm on a budget, of as cheap as i can get it!
Cheers
Graham
- Smaller Steering Wheel (flat bottomed)
Sparco or Momo 27D. The Momo is the dogs danglies. About £100 for either of them.
- Cycle Wings and Brakets to change from the swept ones I have at the moment!
Talk to Paul. His carbon ones are funky. You'll also need the brackets, either Westfield, Cat Motorsport or Plays Kool should be able to sort you some out.
- Aeroscreen (my new seats make the top of the current windscreen block my vision)
The Westfield double bubble one can be made to fit. Mr Scarfe over on the Westie board has done it. Or occasionally someone on the Se7ens list (I *think* it's Jonathan Rarity) has a run of JPE-a-like aeroscreens made at about £70 a go.
- Custom height roll bar (I've got that sorted out thanks to Plays-Kool!)
Good, good. Paul sourced ours and it's hoooge.
Sparco or Momo 27D. The Momo is the dogs danglies. About £100 for either of them.
- Cycle Wings and Brakets to change from the swept ones I have at the moment!
Talk to Paul. His carbon ones are funky. You'll also need the brackets, either Westfield, Cat Motorsport or Plays Kool should be able to sort you some out.
- Aeroscreen (my new seats make the top of the current windscreen block my vision)
The Westfield double bubble one can be made to fit. Mr Scarfe over on the Westie board has done it. Or occasionally someone on the Se7ens list (I *think* it's Jonathan Rarity) has a run of JPE-a-like aeroscreens made at about £70 a go.
- Custom height roll bar (I've got that sorted out thanks to Plays-Kool!)
Good, good. Paul sourced ours and it's hoooge.
Cheers John,
I'm not looking at paying £200+ for a westfield aeroscreen!
How do I get in contact with that £70 chap??
I'llbe taking the car up to Paul for the roll bar to be fitted and whilst it's there i'll let him to the wings too!
Any ideas on the diff???
Edited to say: Oh i bought one of Paul's GRP seats off Graeme Finlayson of Fluke Motorsport! LOVELY, nice tight fit, and just the right build for me!
Cheers
Graham
>> Edited by GrahamJay on Wednesday 2nd October 23:35
I'm not looking at paying £200+ for a westfield aeroscreen!
How do I get in contact with that £70 chap??
I'llbe taking the car up to Paul for the roll bar to be fitted and whilst it's there i'll let him to the wings too!
Any ideas on the diff???
Edited to say: Oh i bought one of Paul's GRP seats off Graeme Finlayson of Fluke Motorsport! LOVELY, nice tight fit, and just the right build for me!
Cheers
Graham
>> Edited by GrahamJay on Wednesday 2nd October 23:35
Subscribe to the se7ens list (www.se7ens.net) and have a hunt around in the archives for aeroscreens. Or post something on the list.
For your diff query, dunno. My ratio was ok so when I wanted my LSD fitting I just sent the casing and half shafts away to a rally transmission specialist to fit the new diff in there and all the new bearings. Try the se7ens guys, they tend to be much more beardy than the other boards. Someone should be able to help.
Other than that try the WSCC boardroom
>> Edited by juansolo on Thursday 3rd October 08:14
For your diff query, dunno. My ratio was ok so when I wanted my LSD fitting I just sent the casing and half shafts away to a rally transmission specialist to fit the new diff in there and all the new bearings. Try the se7ens guys, they tend to be much more beardy than the other boards. Someone should be able to help.
Other than that try the WSCC boardroom
>> Edited by juansolo on Thursday 3rd October 08:14
Gassing Station | Kit Cars | Top of Page | What's New | My Stuff