T5 gearbox and bellhousing bolt torque settings

[Dalamar]

I can't seem to find these values anywhere. Could you please let me know what's best to use? This is for:

Bolts attaching the bellhousing to the engine.
Bolts attaching the T5 gearbox to the bellhousing.

[phillpot]

Tight and a touch more

[Zener]

Quite sure unless you have a torque wrench obstruction adapter you cant use them on the BH to gearbox lower 2 bolts anyway so just tight then not that I've tried anyway I see no point on fixings like this , and BH to motor are 3/8 UNC so 30 ft pounds should do you

[lancepar]

Don't do as the the old mechanics used to jokingly say, before torque wrenches were invented...... "tighten it till it strips and back it off a bit"

[Dalamar]

Thanks everyone. I'll be sensible when bolting it all back together.