Bad parking, bad statement...
Bad parking, bad statement...
Author
Discussion

Hard-Drive

Original Poster:

4,274 posts

253 months

Wednesday 17th June 2020
quotequote all


"Loganair said in a statement: "A Loganair Embraer 145 regional jet, parked with no passengers or crew members aboard, was hit by a former Flybe Bombardier Q400 aircraft, which we understand was being prepared for departure after being stored at Aberdeen Airport. The nose of the Q400 impacted the rear port side of the Embraer, becoming lodged underneath and lifting the right main gear off the ground."

Erm, isn't that the starboard side?

https://www.bbc.co.uk/news/uk-scotland-north-east-...

Marlin45

1,334 posts

188 months

Wednesday 17th June 2020
quotequote all
You have to word it for luddites wink

That'll be an expensive repar bill!

matchmaker

8,969 posts

224 months

Wednesday 17th June 2020
quotequote all
You must wonder how on earth they managed this on an almost deserted airport!

Buzz84

1,477 posts

173 months

Friday 19th June 2020
quotequote all
CCTV recording of the incident

https://www.eveningexpress.co.uk/fp/news/local/hol...

Got to admire their determination to try and hold the thing back.

808 Estate

2,572 posts

115 months

Saturday 20th June 2020
quotequote all
Surprised the guy who jumped out didnt stay in and apply the brakes

surveyor

18,618 posts

208 months

Sunday 21st June 2020
quotequote all
808 Estate said:
Surprised the guy who jumped out didnt stay in and apply the brakes
My guess is no brake pressure.

twister

1,560 posts

260 months

Sunday 21st June 2020
quotequote all
It doesn't look like either of the props are turning, and there's no tug pushing or pulling, so is the apron area really on such a slope that it could cause an unpowered aircraft to pick up that much speed if the brakes were released? I know runways aren't billiard table flat, but I'd assumed the apron areas would be kept as flat as possible to reduce the risk of stuff rolling around if left unbraked/chocked.

Mind you, given that it clearly wasn't trying to move under either its own power or with the assistance of a tug, then why would the wheels have been left unchocked - especially if the apron really is sloped enough to allow things to roll like that? From what I recall of ground handling procedures from my youthful plane spotting years, wheels would get chocked almost as soon as the aircraft came to a stop at the stand, and would only then get unchocked again just before it was ready to move or be moved off.

Mortgage_tom

1,532 posts

250 months

Sunday 21st June 2020
quotequote all
Buzz84 said:
CCTV recording of the incident

https://www.eveningexpress.co.uk/fp/news/local/hol...

Got to admire their determination to try and hold the thing back.

AER

1,145 posts

294 months

Tuesday 23rd June 2020
quotequote all
surveyor said:
808 Estate said:
Surprised the guy who jumped out didnt stay in and apply the brakes
My guess is no brake pressure.
Also no nosewheel steering...?

Paul-427

79 posts

110 months

Tuesday 23rd June 2020
quotequote all
Had something similar at Filton when we were converting the VC10's.

An aircraft was pushed out of the hangar with a guy in the cockpit to apply the parking brake. It was pushed out of the Brabazon hangar onto the sloping apron behind. The cockpit guy applied the parking brake, the tug was disconnected before the chocks were placed.

The aircraft started rolling back towards the now closed hangar doors !

Chocks were thrown under the nose wheels but it bumped over the first 2 sets before finally stopping on the third, approx 20 feet from the hangar doors.

Everyone was relieved but the Foreman got a hell of a bking smile

Kiribati268

572 posts

161 months

Wednesday 24th June 2020
quotequote all
Paul-427 said:
Had something similar at Filton when we were converting the VC10's.

An aircraft was pushed out of the hangar with a guy in the cockpit to apply the parking brake. It was pushed out of the Brabazon hangar onto the sloping apron behind. The cockpit guy applied the parking brake, the tug was disconnected before the chocks were placed.

The aircraft started rolling back towards the now closed hangar doors !

Chocks were thrown under the nose wheels but it bumped over the first 2 sets before finally stopping on the third, approx 20 feet from the hangar doors.

Everyone was relieved but the Foreman got a hell of a bking smile
Bloody lucky! Chocks are only good for stopping it rolling, not stopping it once rolling.

Even then i've seen a couple of aircraft bump over chocks in stormy weather with the parking brake set. Happened with a Flybe at Manchester in early March.