Cerbera 4.5 cold Starting
Discussion
Just wanted to check something
When i start my Cerb from cold i depress the pedal silghtly and once fired up keep it depresed for 30 secs to a minute after which it will idle nicely.
It wont idle properly for the fisrt 30 secs to a minute if i lift of the pdeal it will go very lumpy and stall.
Most modern cars when cold idle at sightly higher revs for the initial start up automatically and then settle at the normal level after a short while
Is this normal?
When i start my Cerb from cold i depress the pedal silghtly and once fired up keep it depresed for 30 secs to a minute after which it will idle nicely.
It wont idle properly for the fisrt 30 secs to a minute if i lift of the pdeal it will go very lumpy and stall.
Most modern cars when cold idle at sightly higher revs for the initial start up automatically and then settle at the normal level after a short while
Is this normal?
Gassing Station | Cerbera | Top of Page | What's New | My Stuff


