Breather Hoses RV8

[lancepar]

I was doing some simple tests, one was checking the Throttle Pot shut voltage which was a tad high and needs resetting....work in hand.

In order to improve access to the connector I decided it would be easy to pull the plenum hoses apart.......... wrong.

Made myself another job aint I, the Tee piece was so brittle that after the small hose snapped off I had to break up the other stubs to get them out of the hoses.



Anyway no big deal and this kit should provide the bits I need.



No need to add where from......cheap as chips.

[Barreti]

Glad you got it sorted out Lance
Rimmer Bros?

[phillpot]

Barreti said:

Glad you got it sorted out Lance
Rimmer Bros?

lancepar said:

No need to add where from......cheap as chips.

Sounds more like Ebay?

[lancepar]

Must say I didn't think of Rimmers when searching............ don't tell me they are cheaper.

Yes yabE

https://tinyurl.com/y9joqqdb

[lancepar]

The replacements went on well didn't need any trimming as it looks like the old ones did. The hose to the flame trap didn't need the jubilee clip to hold it on as with the old hose.