Could someone with a 3D printer help me out?

[GTO-3R]

I've had an idea of something I want to make a prototype for and a 3D printed model would be ideal. Problem is I don't own one or know anyone who does, so I was wondering if someone on here has one and would be willing to help in some way?

The size is W 450mm x D 150mm x H 50mm (at it's highest point but 95% of it is 20mm high).

Is that size possible on a home printer?

[Amused2death]

In terms of "domestic" printers, the largest I've seen is 300x300x400mm

Mine is 250x250x250mm

[Dave.]

if it's just a prototype, can you split the "tall" bit into two or three interlocking parts?

[david-7ae4l]

You can try this website if your happy to upload your model for a quote.
https://www.3dhubs.com/manufacture/?technology=3d-...

[GTO-3R]

Dave. said:

if it's just a prototype, can you split the "tall" bit into two or three interlocking parts?

Thinking about it I could leave that part off and use an “off the shelf” item as it’s not a critical piece for prototype purposes! So it would be 20mm high all over

[GTO-3R]

david-7ae4l said:

You can try this website if your happy to upload your model for a quote.
https://www.3dhubs.com/manufacture/?technology=3d-...

Thanks, I’ll have a look in to that too

[Amused2death]

If it comes within the dimensions of my printer and you get stuck then by all means drop me a line.

[GTO-3R]

Amused2death said:

If it comes within the dimensions of my printer and you get stuck then by all means drop me a line.

Thank you, much appreciated