Griffith 1992 Headlight Aim/Alignment

[voso1]

I have just refitted both headlight pods and main beam light units. I was so enthusiastic to get the job done I forgot to mark a wall with the light beams for both the pods and the main beam lights. I know I could do a bit of trial end error and there are various websites stating alignment requirements but has anyone got actual dimensions of beam centres at a certain distance from a wall for a 1992 Griff?
Best regards
Vince Smith.

[Steve_D]

Measurements from another car would not be relevant as the alignment is referenced to the height of YOUR headlights above the ground.
A rule of thumb is measure the height from the ground to the flat cut-off part of the beam. Measure this immediately in front of the car.
The beam should be set pointing down slightly (1cm for every meter away).

Steve

[voso1]

Thanks for that. I will give it a go!

[Loubaruch]

I used this to set my headlights:


https://mattersoftesting.blog.gov.uk/the-mot-headl...