Which Under body Seal should I use.

[bazjude2998]

I have a fibreglass shell on a spit upside down so perfect for coating the underside.The wheel arches have been sprayed and a nice dimple effect achieved I would like this finish on the rest of the underside.Shultz has been suggested,is the dimple finish down to the gun?Any advice and or recommendations for the correct product,would like it colour matched to the car.
I only have a small compressor ( no snide comments).9 cfm but small tank.
Thanks

[steveo3002]

shutz stays semi sticky , id go with overpaintable stonechip in black , can gloss over it if you wish , yes its the shutz gun that makes the effect

raptor is a more expensive ,more durable version of the above , i think you will need a bigger compressor

[bazjude2998]

Thanks Steve for info

[SlimJim16v]

Buzzweld's WAR can be ordered in any colour you want.

https://www.buzzweld.co.uk/

[bazjude2998]

Thanks Slimjim,sounds good.
Pistonheads forums never fails

[bazjude2998]

Anybody used Bed Liner,I,m told you can add colour to the clear version.
Thanks

[Chris32345]

bazjude2998 said:

Anybody used Bed Liner,I,m told you can add colour to the clear version.
Thanks

What brandy that's the key part


Raptor is is one of the best you can get for toughness but not the cheepest of stuff

[Jbliss]

Raptor Bedliner is great

[bazjude2998]

Thanks for all replies,I have done research and chatted to various sprayers,and all tell me having a garage attached to the kitchen and rammed full of all manner of things spraying would not go down well with the boss.
I can’t take it to a paint shop as it’s just a bare body shell and bolted to a fixed spit.
Any suggestions of a product that could be rollered or brushed on.
Thanks

[Chris32345]

bazjude2998 said:

Thanks for all replies,I have done research and chatted to various sprayers,and all tell me having a garage attached to the kitchen and rammed full of all manner of things spraying would not go down well with the boss.
I can’t take it to a paint shop as it’s just a bare body shell and bolted to a fixed spit.
Any suggestions of a product that could be rollered or brushed on.
Thanks

Do you not have a driveway you couuld spray it on

Stonechip type paint because of its weight dosnt blow around much like normal spray paint so oversparay is minimal