Part numbers advice
Discussion
Hi Abdullah,
I'm not sure what exactly you are looking for, but for the DB9, here is the PCV and engine mounts on Amazon or Ebay. You can pick your country and click and buy!
This website was exceedingly helpful: https://aston1936.com/2017/08/07/how-to-replace-th...
PCV Valve - EV152D: https://www.amazon.com/gp/product/B000C5DJCE/ref=p...
You could cross check on Scuderia, but I'd be surprised if it wasn't the same part. I also picked up some new "Y"s and "T"s from the plumbing section of Amazon.
Engine Mount: You want a C2C31215 - https://www.ebay.com/sch/i.html?_from=R40&_trk...
My rule on these types of parts (where the pain to replace is high, is to go with either Original Equipment or OEM (OE or OEM). So a Ford or Jag part which will run $120-$150 or so and not the $35 dollar specials.
Can't help you with the rear mounts or the t-stat... Good luck!
I'm not sure what exactly you are looking for, but for the DB9, here is the PCV and engine mounts on Amazon or Ebay. You can pick your country and click and buy!
This website was exceedingly helpful: https://aston1936.com/2017/08/07/how-to-replace-th...
PCV Valve - EV152D: https://www.amazon.com/gp/product/B000C5DJCE/ref=p...
You could cross check on Scuderia, but I'd be surprised if it wasn't the same part. I also picked up some new "Y"s and "T"s from the plumbing section of Amazon.
Engine Mount: You want a C2C31215 - https://www.ebay.com/sch/i.html?_from=R40&_trk...
My rule on these types of parts (where the pain to replace is high, is to go with either Original Equipment or OEM (OE or OEM). So a Ford or Jag part which will run $120-$150 or so and not the $35 dollar specials.
Can't help you with the rear mounts or the t-stat... Good luck!
AM4884 said:
Hi Abdullah,
I'm not sure what exactly you are looking for, but for the DB9, here is the PCV and engine mounts on Amazon or Ebay. You can pick your country and click and buy!
This website was exceedingly helpful: https://aston1936.com/2017/08/07/how-to-replace-th...
PCV Valve - EV152D: https://www.amazon.com/gp/product/B000C5DJCE/ref=p...
You could cross check on Scuderia, but I'd be surprised if it wasn't the same part. I also picked up some new "Y"s and "T"s from the plumbing section of Amazon.
Engine Mount: You want a C2C31215 - https://www.ebay.com/sch/i.html?_from=R40&_trk...
My rule on these types of parts (where the pain to replace is high, is to go with either Original Equipment or OEM (OE or OEM). So a Ford or Jag part which will run $120-$150 or so and not the $35 dollar specials.
Can't help you with the rear mounts or the t-stat... Good luck!
Really appreciate it brotherI'm not sure what exactly you are looking for, but for the DB9, here is the PCV and engine mounts on Amazon or Ebay. You can pick your country and click and buy!
This website was exceedingly helpful: https://aston1936.com/2017/08/07/how-to-replace-th...
PCV Valve - EV152D: https://www.amazon.com/gp/product/B000C5DJCE/ref=p...
You could cross check on Scuderia, but I'd be surprised if it wasn't the same part. I also picked up some new "Y"s and "T"s from the plumbing section of Amazon.
Engine Mount: You want a C2C31215 - https://www.ebay.com/sch/i.html?_from=R40&_trk...
My rule on these types of parts (where the pain to replace is high, is to go with either Original Equipment or OEM (OE or OEM). So a Ford or Jag part which will run $120-$150 or so and not the $35 dollar specials.
Can't help you with the rear mounts or the t-stat... Good luck!
I made a mistake and did not mention car it is a 2007 manual vantage
I am now in persuite of engine mounts from FORD since they are cheaper than jag and aston
2 front mounts to be exact (only one leaked but reocmmened to change both since we are there by a trusted mechanic who used to work on the same ones from jag and ford cars) and the PCV valve
i found the thermostat supposedly its motorcraft/ford RT-1163-1x
i agree with ur advice regarding hard to reach parts and Won't buy some knock offs but I really need either the part number or the FORD car it is from to go to a local parts shop
thank you so much
Intrepid65 said:
If you are looking for a Crankcase pressure regulating valve for the V8 it is identical to the JLR part LR003380
replaced mine with this part and is identical, part markings etc.
Thanks a lot!replaced mine with this part and is identical, part markings etc.
juts confirmed it seems probably identical
question is
is the land rover cheaper or more expensive than the Jag brand tax?
one last question do I need to change this preventative ? I understand bad PCV doesn't always make a buzz sound and the result is horrible (oil in the wrong place)
car is 2007 on 50k miles and never had it done.
also stood for 3.5 years almost minimal sub 100km in that period before I inspected it and bought it
I bought mine from Rimmer bros. my guess is that the price is the same for Jag and LR, certainly cheaper than Aston for the identical part. I did check both parts side by side and all the markings and numbers are exactly the same.
I replaced mine as the original started buzzing, I can't advise on a change for preventative means or how to diagnose a faulty one without the buzzing!
I replaced mine as the original started buzzing, I can't advise on a change for preventative means or how to diagnose a faulty one without the buzzing!
Intrepid65 said:
I bought mine from Rimmer bros. my guess is that the price is the same for Jag and LR, certainly cheaper than Aston for the identical part. I did check both parts side by side and all the markings and numbers are exactly the same.
I replaced mine as the original started buzzing, I can't advise on a change for preventative means or how to diagnose a faulty one without the buzzing!
Thank you sirI replaced mine as the original started buzzing, I can't advise on a change for preventative means or how to diagnose a faulty one without the buzzing!
is the buzz loud hearing from outside the car with a closed bonnet or within it
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


