Bell Housing Removal

[johnbear]

Does anyone know the procedure to remove the bell housing on a Cerbere Speed Six?

I know the gearbox has to be removed first, but if anyone has done the job before, I would appreciate them passing on the procedure.

The clutch fluid line into the housing won't tighten on the male to male connector so I've got to rethread it.

Help!!!

[Extra 300 Driver]

Here u go!

www.pistonheads.com/gassing/topic.asp?f=6&h=&t=160940

[johnbear]

Fanastic, I really appreciate that.

Will update the thread with any differences I find for speed six. A Phil and I will tackle the job on Saturday.

Many Thanks

John

[johnbear]

Hi,

Got the gearbox, bellhousing and clutch out. It's a nightmare of a job.

I think it must be easier to drop and engine and gearbox as one unit.

Removing the starter motor on this SP6 was hell.

My clutch is missing 8 fingers.

It feature springs in the clutch plates. The number is CP582 34crv with No.28 witten on to the unit. Is this the new design of clutch or the old version where I have to replace the flywheel?

Cheers