488 front plate

[Mdonnelly14]

So, I’ve got my new 488 but the front plate looks ridiculous.

What’s my options remove it and take the risk ?

Or is there some other alternatives to make it look better ?

[Drl22]

I would use the search button.

Unless of course you just wanted to tell us all you’d bought a 488, then we could make the thread much better with some pictures.

Edited by Drl22 on Monday 14th December 11:41

[Mdonnelly14]

Drl22 said:

I would use the search button.

Unless of course you just wanted to tell us all you’d bought a 488, then we could make the thread much better with some pictures.

Edited by Drl22 on Monday 14th December 11:41

I couldn’t find the search function!

Thanks

[jd2]

Here you go....
https://www.pistonheads.com/gassing/topic.asp?h=0&...

Enjoy your 488

[London GT3]

I ran my 488 Spider with a 3/4 size plate from Fancy Plates . COM

[NoBrakesWC]

Have a sticker plate on the bonnet?

[Djit]

Good idea. Anyone have pics of stick on plates?

[NMNeil]

Djit said:

Good idea. Anyone have pics of stick on plates?

Still illegal.

(3) This paragraph requires the plate to be fixed—

(a)vertically or, where that is not reasonably practicable, in a position as close to the vertical as is reasonably practicable,
https://www.legislation.gov.uk/uksi/2001/561/regul...

[SRBA]

London GT3 said:

I ran my 488 Spider with a 3/4 size plate from Fancy Plates . COM

How is that fixed to the car?

I currently have a full size plate in place using ‘sticker pads’ & they hold very well. I will get the car detailed, PPF installed & will then look to add a smaller plate

[GT3ZZZ]

You could go for a Carbonio removable plate mount so you can just put it on when needed e.g. channel crossing or areas where high chance of a tug

https://carbonio.com/collections/ferrari/products/...

[Turbo cab]

Or you could just risk it without.

I haven't run a front plate on any of my supercars in the last eight years and have had one fine.

[SRBA]

London GT3 said:

I ran my 488 Spider with a 3/4 size plate from Fancy Plates . COM

I’ve just ordered a couple of sizes from them for my front plate, 1 x 3/4 size and 1 x custom size (288mm x 111mm).

Your 3/4 plate looks a lot smaller than I would’ve of thought