OBD II disabled
Author
Discussion

eglf

Original Poster:

173 posts

252 months

Friday 18th December 2020
quotequote all
Is it possible to disable the OBD socket to stop car thieves programming a key by putting a switch on pin 16 (+12v) of the OBD socket.

thebraketester

15,815 posts

168 months

Friday 18th December 2020
quotequote all
Yeah. Pull the power wire out of the back of it.

blank

3,765 posts

218 months

Saturday 19th December 2020
quotequote all
You'd be better off disconnecting/switching pins 6 and 14 (CAN H and L). If the device the theives were using was powered from the computer it was plugged into, or battery powered etc then disconnecting the power wouldn't help.

Or you could just unscrew the port and tuck it out of the way, hoping that if they can't easily get to it they'll move on to the next one.

348jeff

132 posts

157 months

Saturday 19th December 2020
quotequote all
Put obd2 dummy in ebay search.

These basicly replace your existing OBDII port with a fake one with your existing one resited to somewhere else of your choosing.