Citron C2 2006 1.1 Petrol Engine - Clutch Change
Discussion
Hi, need some help.
I am changing a clutch assembly on Citron C2. The existing thrust bearing and the sliding shaft sleeve were totally worn into pieces. I have put the gearbox back with hard work and found the main lever has come off the pivot and stuck. So need to remove the gearbox again with basic jacks.
1. During bolting the pressure plate, I did not secure the flywheel and the engine/flywheel did turn clockwise. Would this cause any issue or do I need to do any checks?
2. Also the clutch slave cylinder showed a sign of a leak and planning to replace it. There is no video or proper instructions to replace a clutch slave cylinder. Can anyone help?
Planning to get under the car when the weather is warmer.
I am changing a clutch assembly on Citron C2. The existing thrust bearing and the sliding shaft sleeve were totally worn into pieces. I have put the gearbox back with hard work and found the main lever has come off the pivot and stuck. So need to remove the gearbox again with basic jacks.
1. During bolting the pressure plate, I did not secure the flywheel and the engine/flywheel did turn clockwise. Would this cause any issue or do I need to do any checks?
2. Also the clutch slave cylinder showed a sign of a leak and planning to replace it. There is no video or proper instructions to replace a clutch slave cylinder. Can anyone help?
Planning to get under the car when the weather is warmer.
Gassing Station | Home Mechanics | Top of Page | What's New | My Stuff