My tyre inflator has gone WEAK
Discussion
I'd like to try repair my tyre inflator, im sure it'll be a cheap and simple job.
It turns on and appears to work but, it won't build enough pressure to pump the tyre up fully, only to about 1/3 of the way if that.
What could be the usual culprit?
Before anyone says to just buy another as they're only £9, mine cost £110 as it has a built in work light and jump starter. Its this one:
https://www.machinemart.co.uk/p/clarke-jumpstart-1...
It turns on and appears to work but, it won't build enough pressure to pump the tyre up fully, only to about 1/3 of the way if that.
What could be the usual culprit?
Before anyone says to just buy another as they're only £9, mine cost £110 as it has a built in work light and jump starter. Its this one:
https://www.machinemart.co.uk/p/clarke-jumpstart-1...
ToMeToYou said:
I'd like to try repair my tyre inflator, im sure it'll be a cheap and simple job.
It turns on and appears to work but, it won't build enough pressure to pump the tyre up fully, only to about 1/3 of the way if that.
What could be the usual culprit?
Before anyone says to just buy another as they're only £9, mine cost £110 as it has a built in work light and jump starter. Its this one:
https://www.machinemart.co.uk/p/clarke-jumpstart-1...
That ad says sixty quid, not one hundred and ten?! It turns on and appears to work but, it won't build enough pressure to pump the tyre up fully, only to about 1/3 of the way if that.
What could be the usual culprit?
Before anyone says to just buy another as they're only £9, mine cost £110 as it has a built in work light and jump starter. Its this one:
https://www.machinemart.co.uk/p/clarke-jumpstart-1...
The Mad Monk said:
That ad says sixty quid, not one hundred and ten?!
Thats because machine mart are selling off old stock cheap. I paid £110 and im only listing the advert to show what I have, not to confirm the prices or try to sell you the item 
Edited by ToMeToYou on Sunday 14th February 08:44
The user manual below has an exploded parts diagram that might help, there's also the numbers and emails for Clarke parts and service if you need any bits for it.
https://www.clarkeservice.co.uk/manuals/jumpstart/...
https://www.clarkeservice.co.uk/manuals/jumpstart/...
Smiljan said:
The user manual below has an exploded parts diagram that might help, there's also the numbers and emails for Clarke parts and service if you need any bits for it.
https://www.clarkeservice.co.uk/manuals/jumpstart/...
Will be handy, thankshttps://www.clarkeservice.co.uk/manuals/jumpstart/...
Gassing Station | Home Mechanics | Top of Page | What's New | My Stuff


