Radial Caliper Bolt Suppliers?

[lukeyman]

Any suggestions for a trustworthy source?

Not necessarily after fancy... just need some longer ones.

Cheers.

[Merch131]

Always had good service from Pro Bolt https://www.pro-bolt.com/

[lukeyman]

Ah... forgot to say. Tried Pro-Bolt already. They don't go up to 95mm.

[the cueball]

I normally search in ebay for the bike then Titanium bolt... usually I get a couple of hits, then message the sellers to see if they can do/get longer ones.

[Fitz666]

Westfield fasteners are good.

[lukeyman]

the cueball said:

I normally search in ebay for the bike then Titanium bolt... usually I get a couple of hits, then message the sellers to see if they can do/get longer ones.

So you've used some eBay specials? And survived?

[the cueball]

lukeyman said:

So you've used some eBay specials? And survived?

Nope, I'm using a ouija board to try and help you out....

[Chris32345]

the cueball said:

I normally search in ebay for the bike then Titanium bolt... usually I get a couple of hits, then message the sellers to see if they can do/get longer ones.

Titanium bolts are weaker then harden steel bolt's not sure why you'd want to use them

[the cueball]

Chris32345 said:

Titanium bolts are weaker then harden steel bolt's not sure why you'd want to use them

Because it's my bike and I have a choice..

[catso]

lukeyman said:

Ah... forgot to say. Tried Pro-Bolt already. They don't go up to 95mm.

That's a long bolt.

I bought some 75mm, M10 fine (1.25 pitch) for some forks that I no longer have and they were not so easy to find.

These any good? https://www.ebay.co.uk/itm/M10-Titanium-Hex-Drille...

[lukeyman]

catso said:

lukeyman said:

Ah... forgot to say. Tried Pro-Bolt already. They don't go up to 95mm.

That's a long bolt.

I bought some 75mm, M10 fine (1.25 pitch) for some forks that I no longer have and they were not so easy to find.

These any good? https://www.ebay.co.uk/itm/M10-Titanium-Hex-Drille...

That's what I'm wondering...

They're to go with a Roadlok I bought second hand. They'd usually supply 80s and 90s and some spacers. The spacers I got would go nicely with 95s.

At least if I kept the original steel bolts on the other side I'd have some redundancy!

[lukeyman]

the cueball said:

lukeyman said:

So you've used some eBay specials? And survived?

Nope, I'm using a ouija board to try and help you out....

Bluetooth or USB?

[Carnage]

Westfield Fasteners.

Nice guys and very quick.

[lukeyman]

Unfortunately Westfield don't have the flanged head in the right pitch and the cap head is too short.

[Carnage]

Annoying! Sorry mate.

[smifffymoto]

Try Threadfast in Congleton.

[bimsb6]

Chris32345 said:

the cueball said:

I normally search in ebay for the bike then Titanium bolt... usually I get a couple of hits, then message the sellers to see if they can do/get longer ones.

Titanium bolts are weaker then harden steel bolt's not sure why you'd want to use them

I’ve got stainless bolts all over my harley and I’ve only died twice because of them , result !

[lukeyman]

Carnage said:

Annoying! Sorry mate.

Cheers anyway. And to Fitz for suggesting them too.

smifffymoto said:

Try Threadfast in Congleton.

Will do. Give me something to do tomorrow!

[Triaguar]

BAPP Industrial Supplies Barnsley.. would be amazed if thcannot help

[Geoffmarti]

lukeyman said:

Will do. Give me something to do tomorrow!

Did you manage to get anywhere with this?? I have exactly the same issue - roadlok Is on a 2020 Versys 1000.