Nissan Primastar P0235 error
Discussion
Hi All
Got a 2006 2.0 Primastar which has the glow plug light on and is in limp mode. I have done a scan and get a fault code of P0235 Turbo Boost Sensor Circuit "A"
I picked up a know working used map sensor the same part number but still same issue and can't reset the code. The small pipe connected to it seems fine with no leaks and if try and back probe the sensor i get 4.54v from the main wire. With the earth and other wire I get around 1.67v on tick over and 2v when I get it up to 2500rpm which is the max it will rev in limp mode. I even tried a boost solenoid out of curiosity but still the same issue.
Can anyone point me in the right direction
Got a 2006 2.0 Primastar which has the glow plug light on and is in limp mode. I have done a scan and get a fault code of P0235 Turbo Boost Sensor Circuit "A"
I picked up a know working used map sensor the same part number but still same issue and can't reset the code. The small pipe connected to it seems fine with no leaks and if try and back probe the sensor i get 4.54v from the main wire. With the earth and other wire I get around 1.67v on tick over and 2v when I get it up to 2500rpm which is the max it will rev in limp mode. I even tried a boost solenoid out of curiosity but still the same issue.
Can anyone point me in the right direction
Gassing Station | Home Mechanics | Top of Page | What's New | My Stuff