A tip.... spacers 6.5mm if you put on 304mm discs

[flyingdutchie]

I was just looking for spacers of the right dimension (I now have some washers in between). If you buy from a Lotus Elise parts dealer you can buy the exact 6.5mm spacers. These are needed when you go from the 291mm dimension disc to the 304mm.

[DuncanM]

Hello,

When I need discs, I'm going to try these:

https://www.mtecbrakes.com/brake-discs/dodge/nitro...

I am currently on 291mm, I believe the above will fit without spacers?

Certainly worth a try

[Jhonno]

DuncanM said:

Hello,

When I need discs, I'm going to try these:

https://www.mtecbrakes.com/brake-discs/dodge/nitro...

I am currently on 291mm, I believe the above will fit without spacers?

Certainly worth a try

MTEC discs are poor..

[DuncanM]

Jhonno said:

MTEC discs are poor..

Ok, any dodge nitro spec discs will be the same.

[Jhonno]

DuncanM said:

Ok, any dodge nitro spec discs will be the same.

Yes, but non will be designed with particularly high spec/peformance in mind..

[DuncanM]

Jhonno said:

Yes, but non will be designed with particularly high spec/peformance in mind..

Objectively, they are a 302mm disc, designed to stop a 2 ton 4x4.

They're also a disc that may not need spacers, and that definitely appeals to me.

[Jhonno]

DuncanM said:

Jhonno said:

Yes, but non will be designed with particularly high spec/peformance in mind..

Objectively, they are a 302mm disc, designed to stop a 2 ton 4x4.

They're also a disc that may not need spacers, and that definitely appeals to me.

Doesn't make them high quality or performance to stop a mummy wagon once in a 30 zone..

[flyingdutchie]

If i would be in need for new front discs i would buy the 322mm. Very common I think. In the past they did put on the 304mm and used spacer washers in my case. I lost one of the washer now, but found these Lotus Elise spacers which have the correct dimension. It is 6.5mm what you need to go to 304mm.