Cerbera 4.2 ECU software and lead

[Hobby1964]

Hi, I'm looking to set up the throttle bodies and reset the tickover and I'm looking to obtain the software and lead to read the ECU. Can anyone suggest where I can get these from please? I understand that there may even be a phone app to enable me to do this.

Any information would be much appreciated.

[CerbWill]

RSAJP for Android or RSiAJP for iPhone. Try tvr-cerbera.co.uk for the original software. Cables can be found on eBay or partsfortvrs.com, plus other places probably. You need to check your ECU out and see if you have an early one with a serial plug inside it, or a later 1 with a 3 pin diagnostic connector hanging around in the footwell. You'll need a serial to USB adapter too if you're using anything but the most ancient of laptops.

[EvoOlli]

Or you could use my Windows Software, which runs under W10:

http://wiechens.de/mbetool/mbetool.zip

[Hobby1964]

Thanks for that, the W10 version opened straight away. Do you know if there is a lead available "off the shelf" rather than getting the parts and making one up? I have the 9 pin serial on the ECU. I can find the 3 pin but not the 9 pin.

[Hobby1964]

Lead ordered from partsfortvrs.com. Many thanks for your help guys