Jeep dead unless I can find a part!!

[Nick-ykf6l]

Hi,
Am hoping you guys/gals can help!

I am after the middle pipe from fuel filter going to lift pump with fuel bleeder on it, it's for a JEEP GRAND CHEROKEE CRD LTD AUTO 2.7 DRD 2005

Part numbers 52100543AD and 52100258AE (if that helps?).

I cant find these anywhere - and my Jeep is bust without it It's highlighted in yellow on the attached.

Thanks in anticipation! 🙂

[HustleRussell]

I take it you’ve tried Jeep?

Make one out of universal hose and hose clips?

[Getragdogleg]

Rock auto ? They have a mad amount of spares.

[Nick-ykf6l]

Jeep no longer make or stock this - Ill try Rock Auto though

[Largechris]

HustleRussell said:

I take it you’ve tried Jeep?

Make one out of universal hose and hose clips?

Breakdown man managed to do this at the side of the road for me - I can't believe you need an OE part to get your old jeep running

[Nick-ykf6l]

That's what the garage is telling me.

[Red9zero]

HustleRussell said:

Make one out of universal hose and hose clips?

Exactly. Or take the duff hose to a motor factors and see what they have with a similar bend that you could cut down and use.

[InitialDave]

What stops them using a generic bit of hose?

But anyway, that's a Mercedes engine, isn't it? Does the part from a Mercedes equivalent fit?

[Nick-ykf6l]

InitialDave said:

What stops them using a generic bit of hose?

But anyway, that's a Mercedes engine, isn't it? Does the part from a Mercedes equivalent fit?

I do believe you are right, Ill try ebay!

Thanks!

[geeks]

Must be loads of Jeep breakers with the part somewhere

[Nick-ykf6l]

geeks said:

Must be loads of Jeep breakers with the part somewhere

Tried quite a few today - no luck.

[paintman]

Was this also used in the Sprinter van as the OM612?

[K50 DEL]

Amazon have your first one in stock

https://www.amazon.co.uk/Genuine-Chrysler-52100543...

The second is slightly harder, there's an earlier revision (AB rather than AE) on ebay currently though

https://www.ebay.co.uk/itm/284100570375?hash=item4...

[gazza285]

K50 DEL said:

Amazon have your first one in stock

https://www.amazon.co.uk/Genuine-Chrysler-52100543...

That link says they are unavailable?

[K50 DEL]

gazza285 said:

K50 DEL said:

Amazon have your first one in stock

https://www.amazon.co.uk/Genuine-Chrysler-52100543...

That link says they are unavailable?

It does now... it didn't earlier lol, OP did you get the last one?

[105.4]

I have a contact who has a very good contact within the Dodge / Jeep dealer network in America.

I’ve come across parts before that are allegedly ‘no longer available’, but he’s managed to find the part quite easily for me through his contact in America and have it shipped to me within a week.

Let me know if you’re still struggling and I’ll pass his number onto you.

[Stigproducts]

https://allegro.pl/oferta/dodge-sprinter-2-7l-dies...

This it?

or this?

https://www.neoriginal.ru/spares/jeep/52100543AD

US is no good to you, they didnt sell a 2.7 Jeep 2005, although it may have been a thing on another make/model

But these foreign chappies seems to have one.

Edited by Stigproducts on Friday 1st October 19:38

[Belle427]

It may be possible to just use a suitable rubber hose for the entire length as suggested.

[GreenV8S]

See if you can identify the end fittings. They're probably a standard spec, in which case you should have no problem getting replacements made. If you have a Pirtek agent near you, they'll probably make you a replacement on the spot.

[evilmunkey]

so long as hose isnt latex based they die when oil looks at it whatever you can get say urethane or vinyl and clamps your fine . . bodge and carry on