Painting plenum and rocker covers
Painting plenum and rocker covers
Author
Discussion

REM2112

Original Poster:

418 posts

208 months

Saturday 9th October 2021
quotequote all
I’ve decided to spruce my 98 Chimaera up, including the above. The car is pearlescent blue. Matching or contrasting. Any views or indeed any pictures?

Rob

R8FUN

282 posts

220 months

Saturday 9th October 2021
quotequote all
I kept mine as they left the Factory, TVR Purple & Silver.

Before.



After. Thanks To Heath @X Works.


REM2112

Original Poster:

418 posts

208 months

Saturday 9th October 2021
quotequote all
Nice!

bobfather

11,194 posts

272 months

Saturday 9th October 2021
quotequote all
Did mine with heat resistant crinkle paint, very happy

sixor8

7,103 posts

285 months

Saturday 9th October 2021
quotequote all
On my silver Chimaera back in 2014 I paid to have them done at Central because I had the exhaust manifold gaskets replaced at the same time. The black stripes on the plenum were done by hand by me. I was advised there, and I agreed, that doing the plenum as well is a bit OTT. Very nice, but pricey:



On my last Chimaera, I had a go myself. I could do it in slow time with the car off the road whilst I had the injectors cleaned, using aerosol spray VHT paint. I got a bit of a matt finish, and it dried a lighter shade of blue than I expected, more turquoise really, so whilst not as glossy as powder coat, it was great for under a tenner. smile



You'll need understanding if you bake them in the oven like I did. Even after degreasing, a bit whiffy......


macdeb

8,674 posts

272 months

Saturday 9th October 2021
quotequote all

Mine from a few years back.

REM2112

Original Poster:

418 posts

208 months

Saturday 9th October 2021
quotequote all
Thanks everyone. Great pics. No way my engine will ever look as clean as these!

Italian450

96 posts

104 months

Saturday 9th October 2021
quotequote all
Polishing is an option. I did mine with a dremel and took off all the rough bits from the casting.

Also powder painted the grooves on the rocker covers.



wuckfitracing

990 posts

160 months

Saturday 9th October 2021
quotequote all

As TVR intended for me. Almost.

MuffDaddy

1,459 posts

222 months

Sunday 10th October 2021
quotequote all


Swirl pot powder coated too.

lancepar

1,078 posts

189 months

Sunday 10th October 2021
quotequote all
OTT maybe, but it came my way like this, honest..


Hedgehopper

1,541 posts

261 months

Sunday 10th October 2021
quotequote all
Italian450 said:
Nice looking engine bay but your serpentine belt appears to be taking the wrong route? See ‘Lancep
ar’ for the correct way.


Italian450

96 posts

104 months

Monday 11th October 2021
quotequote all
Thanks “Hedgehopper” it does indeed appear to be the wrong routing!.
Doesn’t however give any apparent problems.

A new job to keep me happy for a few minutes :-)

I have had the car for 18 years and as far as I know this has not been touched. Could be when I had the water pump gasket replaced.

Thanks.

REM2112

Original Poster:

418 posts

208 months

Tuesday 12th October 2021
quotequote all
Thanks again everyone. I think I’m going for TVR purple.

R8FUN

282 posts

220 months

Tuesday 12th October 2021
quotequote all
beer

Podie

46,646 posts

292 months

Tuesday 12th October 2021
quotequote all


I went full on purple