A HOT R/C helicoptor flight
Discussion
mybrainhurts said:
Here's another
http://rob.com/matt/rc/rc_video/alan_vegasfunflydemo_2004.wmv
Watched 2 of the 5 or so minutes of that. Thats incredible.
up-the-dubs said:
mybrainhurts said:
Watched 2 of the 5 or so minutes of that. Thats incredible.
I watched the lot..awesome flying.
>> Edited by supaspark on Monday 25th July 00:26
up-the-dubs said:
mybrainhurts said:
Here's another
<a href="http://rob.com/matt/rc/rc_video/alan_vegasfunflydemo_2004.wmv">http://rob.com/matt/rc/rc_video/alan_vegasfunflydemo_2004.wmv</a>
Watched 2 of the 5 or so minutes of that. Thats incredible.
I liked the upside-down hover, about a centimetre off the deck...
andy mac said:
Check out this little beuty!
www.wimp.com/foam/
Outrageous! I tried building an ekranoplanz (look it up
) but it was too heavy to lift off.wedg1e said:
up-the-dubs said:
mybrainhurts said:
Watched 2 of the 5 or so minutes of that. Thats incredible.
I liked the upside-down hover, about a centimetre off the deck...
yea but it cost when you screw that inverted hover up
just stacked one of mine doing it.
off fot 220 quids worth of parts to rebuild.
roop said:
Yep, I fly Raptor 30 v2. Was planning on upgrading to a R90, but bought the RS 500 instead Slight price differential, but who's counting...?
upgrad the 30 to a 50 nearly thr same repair cost as 30
pluss the power to weight ration is very good a 50 will nealy keep up with a 90
just building the 90se at the moment.
Nah. If I'm going to do it, I'll do it properly. I'm more into flying scale than 3D so I'll be going for a Vario Agusta 109 / Jet Ranger / Dauphin, or perhaps even an R90 with the Hughes 500 kit on it.
The 30 does everything I need from a heli in terms of performance. I do fff, loops, rolls, stall turns, upside down circuits, nose in, out, 90° hovers and the same inverted. Not really interested in progressing the 3D any further, wanna fly something that looks like a nice model now.
The 30 does everything I need from a heli in terms of performance. I do fff, loops, rolls, stall turns, upside down circuits, nose in, out, 90° hovers and the same inverted. Not really interested in progressing the 3D any further, wanna fly something that looks like a nice model now.
dragonlord said:
upgrad the 30 to a 50 nearly thr same repair cost as 30
pluss the power to weight ration is very good a 50 will nealy keep up with a 90
just building the 90se at the moment.
anhamgrimmar said:
i think the lynx can(could?) do a loop, when modified with a special rotor set, but never heard of a real chopper sustaining inverted flight.
Seen it at airshows, doesn't do a loop as such, but climbs to an almost static vertical position and then sort of falls over backwards, if that makes sense, into a vertical descent and then levels out
Gassing Station | The Pie & Piston Archive | Top of Page | What's New | My Stuff







Slight price differential, but who's counting...?
