Discussion
Hi,
So I need to remove some security screws so bought a Draper set from Toolstation. Here’s what the bit I need looks like:
I want to use this with my 1/4 socket set but the end of the bit that I’d put a socket or appears to be 6.5mm… why is it this odd size? I don’t posses a socket this size, am I missing something?
So I need to remove some security screws so bought a Draper set from Toolstation. Here’s what the bit I need looks like:
I want to use this with my 1/4 socket set but the end of the bit that I’d put a socket or appears to be 6.5mm… why is it this odd size? I don’t posses a socket this size, am I missing something?
bayzoo said:
Right so I want to use my 1/4 inch square ratchet with this bit, but I’m unsure what to search to to find this adapter, can you give me any pointers? Any I search for doesn’t seem to bring anything that would work up.
1/4 inch af imperial socket will work. Or maybe screwdriver bit adapter.Any socket set that included drive bits would include the holder. It's not unusual for bit sets bought separately to include a holder. The holder is commonly a hex socket with a detent clip to hold the bit in place. They're all a standard size in my experience (I think it's 1/4" AF) so if you ever get hold of one, it'll do for everything.
Gassing Station | Home Mechanics | Top of Page | What's New | My Stuff