Early DB7 Aston Martin OBD problem
Discussion
Obd2 wasn't mandatory in 95 so it could be any weird and wonderful connector requiring paper clips and flashing lights or none at all.
A quick Google turns up a pH thread from 2020 in the Aston Martin section which explains it could be under the dash on either side and may require removal of a footwell panel or might not exist if you don't have a steering wheel airbag.
Good luck.
A quick Google turns up a pH thread from 2020 in the Aston Martin section which explains it could be under the dash on either side and may require removal of a footwell panel or might not exist if you don't have a steering wheel airbag.
Good luck.
This is mine, under the passenger footwell panel. Not much good as theres no diagnostic reader that fit!
You'd best talk to Chris Done https://astondb7.com/

You'd best talk to Chris Done https://astondb7.com/
Yes, the world of Aston Martin! The non airbag cars had a Zytek engine system like the Jaguar Xj220 but changed to the Ford system when they fitted airbags and standard On Board Diagnostic (OBD) connectors which are much easier to connect to.
Is your engine management light on or do you have a running fault? If its the former, you can switch it off by turning the ignition switch on and off between 30 and 40 times in rapid succession.
Is your engine management light on or do you have a running fault? If its the former, you can switch it off by turning the ignition switch on and off between 30 and 40 times in rapid succession.
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


