Reverse lights.
Reverse lights.
Author
Discussion

groucho

Original Poster:

12,134 posts

275 months

Saturday 30th July 2005
quotequote all
Some blokey just told me that both my reversing lights were not working as I was pulling into a space.
I looked at one bulb and it seemed OK, so I looked in the bible for the fuse layout and it says that the reverse lamps share a fuse with the brake lights and the speedo.
Well, I don't know if the brake lights are working, but the speedo definitly is. So, if the speedo is working, doesn't that rule out a fuse problem?

So what could it be?

GreenV8S

31,017 posts

313 months

Saturday 30th July 2005
quotequote all
Sadly TVR didn't have the bible to hand when they wired up the cars so you can't assume they all match what the bible says. If it isn't a blown bulb, wire dropped off the lights, poor earth at the light cluster, wiring fault, blown fuse then it might be a problem with the reverse light switch in the side of the gearbox? Best way to track down is to work through the circuit with a meter and see where the volts stop.

groucho

Original Poster:

12,134 posts

275 months

Saturday 30th July 2005
quotequote all
Crikey, another job for the experts then.

JoolzB

3,549 posts

278 months

Saturday 30th July 2005
quotequote all
groucho said:
Crikey, another job for the experts then.

I'm def no expert but it'd be quite easy to try a few things yourself like GreenV8S suggests especially if you have a mutimeter.

shpub

8,507 posts

301 months

Sunday 31st July 2005
quotequote all
Probably the switch on the gearbox. They can get gunged up or out of alignment. Bit of a major grovel under the car to get to it. It's located on the side of the gearbox remote.

groucho

Original Poster:

12,134 posts

275 months

Sunday 31st July 2005
quotequote all
Cheers guys.

Hoover33

5,993 posts

271 months

Sunday 31st July 2005
quotequote all
Give all the cables to the light a wiggle..... I had no brake lights one week.... that is all it was....

and the other week it was no indicators...... same repair