Can I get number plates made with no documents?
Can I get number plates made with no documents?
Author
Discussion

sxmwht

Original Poster:

2,217 posts

90 months

Wednesday 9th February 2022
quotequote all
I'm looking to get some short (16") plates made up, complete with BSU markings etc. Is there any reasonably priced (<£30) place I can get these done without having to go through the faff of sending off my documents?

I'm assuming the answer is legally no, but I thought I'd ask

MOBB

4,595 posts

158 months

Wednesday 9th February 2022
quotequote all
Myshowplates will

Carbon Sasquatch

5,233 posts

95 months

Wednesday 9th February 2022
quotequote all
I got mine from Fancyplates

No documents required

KTMsm

28,982 posts

294 months

Wednesday 9th February 2022
quotequote all
Without docs no one should make up BSU plates

Obviously loads on ebay will make up plain plates - I have them on all my cars / bikes and have never had a problem

CraigyMc

18,374 posts

267 months

Wednesday 9th February 2022
quotequote all
sxmwht said:
I'm looking to get some short (16") plates made up, complete with BSU markings etc. Is there any reasonably priced (<£30) place I can get these done without having to go through the faff of sending off my documents?

I'm assuming the answer is legally no, but I thought I'd ask
Not from a UK supplier, no.

From a supplier building to the correct spec in ireland, sure. Fancyplates.com.

mickyh7

2,347 posts

117 months

Wednesday 9th February 2022
quotequote all
I just sent photos of my documents.
They were fine about it.
UK seller on eBay.
Plates were all legal and dirt cheap.
Just message seller first.

andy43

13,330 posts

285 months

Wednesday 9th February 2022
quotequote all
Carbon Sasquatch said:
I got mine from Fancyplates

No documents required
+1 for years. They’re based in Ireland so can make what they want.

The spinner of plates

18,084 posts

231 months

Thursday 10th February 2022
quotequote all
andy43 said:
Carbon Sasquatch said:
I got mine from Fancyplates

No documents required
+1 for years. They’re based in Ireland so can make what they want.

yes I've never had a problem either on the road or at MOT.

Mine are correct font, background spacing etc.

Yes - be made from a reflective material
Yes - display black characters on a white background (front plate)
Yes - display black characters on a yellow background (rear plate)
Yes - not have a background pattern
No - be marked to show who supplied the number plate
No - be marked with a British Standard number - this is ‘BS AU 145e’ for plates fitted after 1 September 2021

andy43

13,330 posts

285 months

Thursday 10th February 2022
quotequote all
The spinner of plates said:
andy43 said:
Carbon Sasquatch said:
I got mine from Fancyplates

No documents required
+1 for years. They’re based in Ireland so can make what they want.

yes I've never had a problem either on the road or at MOT.

Mine are correct font, background spacing etc.

Yes - be made from a reflective material
Yes - display black characters on a white background (front plate)
Yes - display black characters on a yellow background (rear plate)
Yes - not have a background pattern
No - be marked to show who supplied the number plate
No - be marked with a British Standard number - this is ‘BS AU 145e’ for plates fitted after 1 September 2021
And if the Spinner of Plates recommends them... thumbup

GhostWKD

570 posts

244 months

Thursday 10th February 2022
quotequote all
After having some crap quality (wonky letters, badly trimmed etc) plates from ebay all of mine come from https://proplates.co.uk/ they arent the cheapest but consistently good quality, no need for docs and small unintrusive maker / legal markings smile

Edited because I remembered the companies name incorrectly, although platesforcars are a good bet also in fairness smile

Can just about make out the plate maker and BSAU markings bottom right;


My front plate is a width to match the number of letters they have all the options smile

Edited by GhostWKD on Thursday 10th February 10:40

sxmwht

Original Poster:

2,217 posts

90 months

Thursday 10th February 2022
quotequote all
The spinner of plates said:

yes I've never had a problem either on the road or at MOT.

Mine are correct font, background spacing etc.

Yes - be made from a reflective material
Yes - display black characters on a white background (front plate)
Yes - display black characters on a yellow background (rear plate)
Yes - not have a background pattern
No - be marked to show who supplied the number plate
No - be marked with a British Standard number - this is ‘BS AU 145e’ for plates fitted after 1 September 2021
As far as I can tell, though, the only way to get a 16x4.4in plate is to use the show option (and a custom size at that), and I'm not sure then if you get the legal details

omniflow

3,881 posts

182 months

Thursday 10th February 2022
quotequote all
4 dot plates will give you the smallest possible legal plate for your registration number.

You don't need to send off documents, but you do need to upload them - which really isn't very hard. They're a little dearer than £30 though.

Buffy d

616 posts

228 months

Thursday 10th February 2022
quotequote all
I used My Show Plates - lots of sizing options and can add the BS details, plus reasonably priced too:
www.myshowplates.com

sxmwht

Original Poster:

2,217 posts

90 months

Thursday 10th February 2022
quotequote all
GhostWKD said:
After having some crap quality (wonky letters, badly trimmed etc) plates from ebay all of mine come from https://proplates.co.uk/ they arent the cheapest but consistently good quality, no need for docs and small unintrusive maker / legal markings smile

Edited because I remembered the companies name incorrectly, although platesforcars are a good bet also in fairness smile

Can just about make out the plate maker and BSAU markings bottom right;


My front plate is a width to match the number of letters they have all the options smile

Edited by GhostWKD on Thursday 10th February 10:40
Seems like just what I was looking for, cheers.

andy43

13,330 posts

285 months

Thursday 10th February 2022
quotequote all
I’ve done custom sized plates ordering an extra large rear plate, no extra charge iirc, from Fancy Plates and taking a jigsaw (fine teeth) to it. Belt sander to lightly smooth off after cutting.
Front is now as small as is legal and the rear is 4dot Maserati shaped.
But much cheaper smile

Strudul

1,599 posts

116 months

Thursday 10th February 2022
quotequote all
Bought plates off ebay for <£10 with all legal markings and not had to provide any evidence.

Should they, no, but loads will.

Scrump

23,948 posts

189 months

Thursday 10th February 2022
quotequote all
sxmwht said:
As far as I can tell, though, the only way to get a 16x4.4in plate is to use the show option (and a custom size at that), and I'm not sure then if you get the legal details
If you are referring to fancyplates then that is no problem.
Order the custom size you want and put a note in the box saying you want UK legal font, spacing and the BS mark and postcode on the bottom.
This has worked for me a few times.

Dog Star

17,650 posts

199 months

Friday 11th February 2022
quotequote all
Plates made in Jersey come with a postcode. Also, last time I looked Scotland didn’t have all this silly plate legislation either.

Just order from showplates etc and specify the BS and postcode. I’ve git small plates on my bikes - even got postcode etc. I buy from them for everything - it’s my way of sticking it to the man because these rules are just plain silly.

CraigyMc

18,374 posts

267 months

Friday 11th February 2022
quotequote all
Strudul said:
Bought plates off ebay for <£10 with all legal markings and not had to provide any evidence.

Should they, no, but loads will.
That law only applies to UK sellers anyway. It is 100% legal for the Irish companies to sell them.

7heGeneral

347 posts

169 months

Friday 11th February 2022
quotequote all
Loads of sellers on ebay will give you a legal plate without documents - I just bought a pair last week. The listing said "Must upload documents etc", but it was dispatched before I even got around to doing it and the plates were at my front door 2 days later. All legal markings etc were present.