Windscreen wiper need some service

[zanardi53]

I want to give my wiper some service as they run very sluggishly, I suspect that the whole system needs to be lubricated. But how do I disassemble the system. I think if I loosen the brass nut and then pull out a wire or something else that control wind screen wipers. Can anyone give me a hint on how to proceed.
As you can see, my car looks a little different, it's an LHD 500

[zanardi53]

[Belle427]

I seem to remember that you remove the wipers to allow the spindles to rotate freely, undo the nut as you suggest then extract the drive cable.

[x 7usc]

Belle427 said:

I seem to remember that you remove the wipers to allow the spindles to rotate freely, undo the nut as you suggest then extract the drive cable.

Exactly this!

[zanardi53]

Thank you, tomorrow I pull out the driveline and hope for the best

[Belle427]

There are lots of threads running on wiper issues if you do a search, there is also a gentleman around who refurbs the components around here with good success.
The best upgrade I found was the replacement motor from Tvr parts, expensive but the difference was night and day.

[zanardi53]

Thanks, for hints, it went well, but it was probably time for service