Lipped brakes Used Approved Mazda
Discussion
I'd say that the bottom line is you've owned the car for 6 months, and there will be no contribution on a consumable item.
From their POV there is nothing to say you haven't driven it very hard over those 2k miles causing the lip.
As others have said, brakes are cheap enough on a car like that, just get them changed and move on.
From their POV there is nothing to say you haven't driven it very hard over those 2k miles causing the lip.
As others have said, brakes are cheap enough on a car like that, just get them changed and move on.
I'm assuming the car is in for a service or something too?
If so, consider that its in their interest to perhaps 'sell' you new brakes too. Some garages push harder than others.
That said, you say they will need replacing soon, that could mean another year, with the low mileage you do.
If so, consider that its in their interest to perhaps 'sell' you new brakes too. Some garages push harder than others.
That said, you say they will need replacing soon, that could mean another year, with the low mileage you do.
[quote=Nigel Foster]
Brakes wear out yes - but the discs will have been worn out prior to my buying the car. The pre-inspection which I don't have a copy of may have flagged this up?
/quote]
But they are not worn out now. They will be worn out at some point in the future.
You have three approaches.
1 go back to the supplying dealer and ask for a contribution (you pay parts, they throw in labour). Unlikely, but worth asking. Get some actual measurements on the disks first
2 go to be inspection people. Almost certainly not worth the effort
3 pay yourself.
I'd try 1 (hope for the best) and mentally expect to do 3 (plan for the worst)
Brakes wear out yes - but the discs will have been worn out prior to my buying the car. The pre-inspection which I don't have a copy of may have flagged this up?
/quote]
But they are not worn out now. They will be worn out at some point in the future.
You have three approaches.
1 go back to the supplying dealer and ask for a contribution (you pay parts, they throw in labour). Unlikely, but worth asking. Get some actual measurements on the disks first
2 go to be inspection people. Almost certainly not worth the effort
3 pay yourself.
I'd try 1 (hope for the best) and mentally expect to do 3 (plan for the worst)
Nigel Foster said:
If that's considered fair I'll take it on the chin.
Brakes wear out yes - but the discs will have been worn out prior to my buying the car. The pre-inspection which I don't have a copy of may have flagged this up?
@easy £380 for genuine parts (probably required to keep warranty live?) £100 less for non genuine. That doesn't seem super cheap. I can't fit them myself.
Have you actually looked at them yourself?Brakes wear out yes - but the discs will have been worn out prior to my buying the car. The pre-inspection which I don't have a copy of may have flagged this up?
@easy £380 for genuine parts (probably required to keep warranty live?) £100 less for non genuine. That doesn't seem super cheap. I can't fit them myself.
Fronts and rears going at the same time isn't all that common. What IS common is for people to be told they need all 4 because it's a nice moneymaker for service departments.
I had a service department advise me that my old TT needed all 4 discs and pads replacing once. This was 3 weeks and practically no miles after they'd been renewed elsewhere.
I'd say it's entirely analogous to tyres wearing out really. I wouldn't expect a dealer to replace them in that situation, but I also probably wouldn't expect a main dealer to be selling an "approved used" vehicle with tyres which are going to hit the legal limit in the next 2000 miles.
If you're not capable of checking yourself, I'd at least ask for the measurements and check them against the manufacturer's specifications. Our Octavia is still on its original brake discs at over 130k miles. Even my Elise, which gets driven pretty hard, is still on its original discs at 63k.
If you're not capable of checking yourself, I'd at least ask for the measurements and check them against the manufacturer's specifications. Our Octavia is still on its original brake discs at over 130k miles. Even my Elise, which gets driven pretty hard, is still on its original discs at 63k.
Edited by kambites on Friday 4th March 12:18
CraigyMc said:
Have you actually looked at them yourself?
Fronts and rears going at the same time isn't all that common. What IS common is for people to be told they need all 4 because it's a nice moneymaker for service departments.
I had a service department advise me that my old TT needed all 4 discs and pads replacing once. This was 3 weeks and practically no miles after they'd been renewed elsewhere.
They've only commented on the front brakes.Fronts and rears going at the same time isn't all that common. What IS common is for people to be told they need all 4 because it's a nice moneymaker for service departments.
I had a service department advise me that my old TT needed all 4 discs and pads replacing once. This was 3 weeks and practically no miles after they'd been renewed elsewhere.
Lincsls1 said:
CraigyMc said:
Have you actually looked at them yourself?
Fronts and rears going at the same time isn't all that common. What IS common is for people to be told they need all 4 because it's a nice moneymaker for service departments.
I had a service department advise me that my old TT needed all 4 discs and pads replacing once. This was 3 weeks and practically no miles after they'd been renewed elsewhere.
They've only commented on the front brakes.Fronts and rears going at the same time isn't all that common. What IS common is for people to be told they need all 4 because it's a nice moneymaker for service departments.
I had a service department advise me that my old TT needed all 4 discs and pads replacing once. This was 3 weeks and practically no miles after they'd been renewed elsewhere.
@Op precisely which model of Mazda is this?
Nigel Foster said:
Car went in because of creaking / metallic sound from OSF at near full lock.
Had hoped it was pebble trapped in pads or calliper wants greasing but Mazda say it's discs. Visual, no measurement given.
Apparently 4k life left in them which could be a year, but I don't know if I can drive around with a disconcerting creaking sound.
Are the genuine parts worth paying extra for?
With stuff like brakes on a car like this, I'd say genuine parts and their inflated prices aren't necessary. If you choose to get them replaced, call a decent independent garage and get a price to compare.Had hoped it was pebble trapped in pads or calliper wants greasing but Mazda say it's discs. Visual, no measurement given.
Apparently 4k life left in them which could be a year, but I don't know if I can drive around with a disconcerting creaking sound.
Are the genuine parts worth paying extra for?
Otherwise, don't know how else to advise, maybe get a 2nd opinion, can't see how lips discs will cause creaking noises during steering near full lock, that's usually more suspension related issues.
Nigel Foster said:
Bought from Mazda franchise at distance.
Local Mazda franchise said they were lipped.
Even if they measure okay.. (service manager just said they were lipped, photo on his smartphone) .. I think I need the creaking sound eliminated.
Maybe take to an indie to get a second opinion?
In my opinion, the car is seven years old and continuing to take it to franchised dealers and paying the associated price premium yields no benefit to you. Local Mazda franchise said they were lipped.
Even if they measure okay.. (service manager just said they were lipped, photo on his smartphone) .. I think I need the creaking sound eliminated.
Maybe take to an indie to get a second opinion?
When are brakes worn out? It is probable that the brakes would pass an MOT brake roller test and neither the pads nor discs are currently worn beyond their limits. The work you are doing to get rid of the noise could be considered 'elective'.
Did the local franchise indicate that renewing the brake discs and pads would eliminate the noise?
CraigyMc said:
Lincsls1 said:
CraigyMc said:
Have you actually looked at them yourself?
Fronts and rears going at the same time isn't all that common. What IS common is for people to be told they need all 4 because it's a nice moneymaker for service departments.
I had a service department advise me that my old TT needed all 4 discs and pads replacing once. This was 3 weeks and practically no miles after they'd been renewed elsewhere.
They've only commented on the front brakes.Fronts and rears going at the same time isn't all that common. What IS common is for people to be told they need all 4 because it's a nice moneymaker for service departments.
I had a service department advise me that my old TT needed all 4 discs and pads replacing once. This was 3 weeks and practically no miles after they'd been renewed elsewhere.
@Op precisely which model of Mazda is this?
Approved used wont measure the thickness of the brake discs as part of the inspection... They are consumable items in any case, what was fine 6 months and 2,000 miles ago, might not be the case now. Had a track rod failed it would be the same deal.
Nigel Foster said:
HustleRussell said:
In my opinion, the car is seven years old and continuing to take it to franchised dealers and paying the associated price premium yields no benefit to you.
Agree, however I do still have 6 months Mazda warranty so trying not to void that. 
Nigel Foster said:
HustleRussell said:
When are brakes worn out? It is probable that the brakes would pass an MOT brake roller test and neither the pads nor discs are currently worn beyond their limits. The work you are doing to get rid of the noise could be considered 'elective'.
Did the local franchise indicate that renewing the brake discs and pads would eliminate the noise?
I did phone back to ask what happens if noise doesn't go away. Quoting service manger seemed confident.. his technician was 'quite happy replacing brakes' would resolve that.. (but adding 'the proof is in the pudding').. explained there's no wear indicator for the car, so there's a shim on the pad that can make a bit of a noise catching the lip.. and he said tends to be heard on a specific lock, suggesting right hand (which is when it's occurring for me)Did the local franchise indicate that renewing the brake discs and pads would eliminate the noise?
They had the car in the air and couldn't see anything else obvious bushings etc..
I did make a recording, not sure how that's turned out maybe I'll post it later
Thanks Lincs and geeks..
Bosch Brake Disc (Front)
Bosch Brake Disc (Front)
Product Code: 104681847
£187.98
unit price £93.99
Remove
Bosch Brake Pad (Front)
Bosch Brake Pad (Front)
Product Code: 101682237
£88.99
unit price £88.99
From Euro Car Parts
Discount code : SERVICE
2x front discs
1x pair front pads
£138
Buy it and move on.
Bosch Brake Disc (Front)
Product Code: 104681847
£187.98
unit price £93.99
Remove
Bosch Brake Pad (Front)
Bosch Brake Pad (Front)
Product Code: 101682237
£88.99
unit price £88.99
From Euro Car Parts
Discount code : SERVICE
2x front discs
1x pair front pads
£138
Buy it and move on.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


