2007 E91 Wheels
Discussion
My dad has an 07 320D (MSport) and it has a set of 18" wheels that are forever getting damaged by the terrible road surfaces round here.
I know the square root of sod all about Beemers, but am assuming (hoping) that wheel bolt patterns are standardised amongst the basic spec models.
Any issues with slinging on a set of used poverty spec steelies/16" basic alloys?
I know the square root of sod all about Beemers, but am assuming (hoping) that wheel bolt patterns are standardised amongst the basic spec models.
Any issues with slinging on a set of used poverty spec steelies/16" basic alloys?
RoadToad84 said:
My dad has an 07 320D (MSport) and it has a set of 18" wheels that are forever getting damaged by the terrible road surfaces round here.
I know the square root of sod all about Beemers, but am assuming (hoping) that wheel bolt patterns are standardised amongst the basic spec models.
Any issues with slinging on a set of used poverty spec steelies/16" basic alloys?
All E90/91 alloys are here and with their offsets and tyre specs too:I know the square root of sod all about Beemers, but am assuming (hoping) that wheel bolt patterns are standardised amongst the basic spec models.
Any issues with slinging on a set of used poverty spec steelies/16" basic alloys?
https://www.auto-treff.com/wcf/index.php?tagged/55...
It's a great website and will give you an idea of what can be fitted without any issues
As it's the 320D; all the alloys should fit as they won't have the bigger M Sport brakes etc
My advice would be to drop to 17s if you can and run normal tyres and bin the RFTs
RoadToad84 said:
Swervin_Mervin said:
Is it still on run flats?
It isFirst thing I did with mine when I got it 12 yrs ago was to bin the run flats. The garage at the time said the wheels were out of true but not too bad, so a couple of years later I had them refurbed and made round again. Never had any trouble since.
In the meantime my wife had 2 1 series on RFTs (she wanted the reassurance) and had a number of bent alloys until she saw the light as well.
indigochim said:
Just be sure you get wheels designed for the E9x cars as they changed the stud pattern or bolt size when they swapped to the F3x model. I also understand they went for slightly less low profile tyres on the later model to try and reduce the cracking alloys issues.
Good to know, thanksMy E90 is a 330i so has the bigger front brakes but being an SE it has 17" wheels which fit fine, and even with run-flats I haven't had any damaged rims in the 3 years I've had it.
I did fit a set of 17" E89 Z4 wheels for the summer as I fancied a change but am selling them as I am considering selling the car. They have a slightly different offset so they sit 5mm further out in the arches but work fine with no rubbing. They may be another option.
I did fit a set of 17" E89 Z4 wheels for the summer as I fancied a change but am selling them as I am considering selling the car. They have a slightly different offset so they sit 5mm further out in the arches but work fine with no rubbing. They may be another option.
Gassing Station | BMW General | Top of Page | What's New | My Stuff


