What's wrong with my computer (again)?
Discussion
Yay - another wassup wiv me 'puter thread.
Intel i5-2520M CPU @ 2.50GHz.
4GB RAM
64-bit Win10 OS
320GB ST320LT007-9ZV142 HDD
Very slow to do anything, HDD access at 100% (suspect that this is Windows fault as the drive shows no problems).
Only used to run CCTV monitoring programme, which works fine.
But if I try to do anything with it I'm there for ages waiting for a response.
Intel i5-2520M CPU @ 2.50GHz.
4GB RAM
64-bit Win10 OS
320GB ST320LT007-9ZV142 HDD
Very slow to do anything, HDD access at 100% (suspect that this is Windows fault as the drive shows no problems).
Only used to run CCTV monitoring programme, which works fine.
But if I try to do anything with it I'm there for ages waiting for a response.
paulrockliffe said:
rfisher said:
4GB RAM
Win10
HDD
These three are not a happy combo. W10 wants 8Gb of RAM and not having an SSD is making that issue worse.Win10
HDD
It's a cheap fix though.
Old Lenovo Laptop with the same i5 Processor, 4GB RAM and Mechanical HDD.
Dreadfully slow.
8GB and SSD
Fairly snappy
M4cruiser said:
Mine does this from time to time, usually is an update downloading (like others have said) either Windows or the virus checker.
Give it a couple of hours and a re-boot, all will be well .... until the next update.
Probably this. Get it all the time across the dozen or so work computers I have to sort out.Give it a couple of hours and a re-boot, all will be well .... until the next update.
rfisher said:
Just had another look at it and the cpu is only running at 0.85 GHz.
HDD intermittently running at 100%.
I'll get a screengrab of the stats to post up later.
Fecking annoying when they do this.
It won’t bother running faster when it is spending time waiting on the HD. Either add RAM/SSD (ideally both), or you’ll get a slight improvement changing to 32 bit Windows as it uses a little less memory.HDD intermittently running at 100%.
I'll get a screengrab of the stats to post up later.
Fecking annoying when they do this.
It really sounds like the HDD is failing, classic sign of trying and failing to read/write data would be the pinning of the disk usage at 100%. I assume this happens with few tasks (applications) running?
Do you have another drive to put in and do a fresh install of Windows to test the rest of the hardware?
I have a tool called Spinrite that I run on all of my disks but it's $90 and you may not want to invest in that for this as a replacement drive might be cheaper.
Do you have another drive to put in and do a fresh install of Windows to test the rest of the hardware?
I have a tool called Spinrite that I run on all of my disks but it's $90 and you may not want to invest in that for this as a replacement drive might be cheaper.
Crystal Disk Info
Free and a quick check (well depending on how slow your machine is running today) of the state of your HDD.
Free and a quick check (well depending on how slow your machine is running today) of the state of your HDD.
Gassing Station | Computers, Gadgets & Stuff | Top of Page | What's New | My Stuff


