Paceracing - your refurbished gauges- a query.

Paceracing - your refurbished gauges- a query.

Author
Discussion

John Mac

Original Poster:

386 posts

264 months

Thursday 17th October 2002
quotequote all
There is probably a simple answer to this so I apologise firstly for my ignorance.In the pictures you posted,your speedo reads 70mph and your tach. just under 3000 rpm.obviously you were not driving when you took them as the other gauges are not reading anything.(shrewd observation)
How did you get them both back to zero??
The reason I am asking is that my tach. is stuck on 2000rpm and wont move. Iv'e just adjusted the tappets and disconnected the battery to get at things, when I put everything back together I noticed for the first time (in months) that the tach. had dropped to zero then crept to around 2000 again and stuck there!!
Any ideas ?

Paceracing

729 posts

267 months

Thursday 17th October 2002
quotequote all
The speedo and tacho are driven by servo motors I think, so when the ignition is switched off and the power to the servos is cut, the weight of the needle pulls the needle down the gauge! Simple as that really. When I turn the ignition back on, the needles all return to zero. It has always done this since I bought the car 6 years ago.

Jas.

P.S. I suspect that one of your connectors under the dashboard is a bit dodgy if yours is stuck. You will find them just to the left of the steering column. (Usually).



>> Edited by Paceracing on Thursday 17th October 21:17

John Mac

Original Poster:

386 posts

264 months

Thursday 17th October 2002
quotequote all
Jas - thanks for that info. I will look at the connections tomorrow.
Out of interest, an earlier thread mentioned that when a speedo was being removed from the dash he found that the cable was sealed into the back of the gauge and presumably the whole thing, cable and all had to be removed - was yours like this ?. If the speedo is electronic presumably its only a wire (cable).
I want to remove mine as the odometer has stopped as well!!
Thanks
John

Paceracing

729 posts

267 months

Thursday 17th October 2002
quotequote all
Mine don't have 'cables' in the traditional sense as you would expect from a mechanical gauge. My gauges, being electronic, have 3 wires each going into them, live, earth, and signal. There is about 8-10 inches of wire coming from the back of each gauge to a multiplug.

Jas.

>> Edited by Paceracing on Thursday 17th October 21:55

roy g

35 posts

268 months

Thursday 17th October 2002
quotequote all
I can confirm Paceracing's comment that cable terminates in a multiplug - the trouble is that you need to be aware of this as it may not be visible when removing the speedo - this was the problem I had.

John Mac

Original Poster:

386 posts

264 months

Thursday 17th October 2002
quotequote all
OK thanks, its all now clear.
John Mac

Podie

46,630 posts

276 months

Friday 18th October 2002
quotequote all
Jas - as discussed, only took a few days before someone made a comment about the dials not being at zero!!!!

Paul V

4,489 posts

278 months

Friday 18th October 2002
quotequote all
A 70mph carpet, that’s good

Podie

46,630 posts

276 months

Friday 18th October 2002
quotequote all

Paul V said: A 70mph carpet, that’s good


Bloody fast sofa..

Should also mention that Jas and his misses (who's name currently escapes me!) are both cracking people and I'd like to thank them for their kind hospitality the other night.

VERY much looking forward to seeing the S2 on the road Jas (when it's finished)...

>> Edited by Podie on Friday 18th October 09:07

johno

8,428 posts

283 months

Friday 18th October 2002
quotequote all
Its Tania. But be careful how you say it !

John Mac

Original Poster:

386 posts

264 months

Friday 18th October 2002
quotequote all
Podie - Us is quite obsurvunt down ere cos us eats a lot uv pasties and it elps us to spot fings like that.
(with apologies to the politically correct !!!)
Janner Mac

Paceracing

729 posts

267 months

Friday 18th October 2002
quotequote all
Johno,
:
Posh tart thinks she's called T-AR-N-I-A!


John Mac said: Podie - Us is quite obsurvunt down ere cos us eats a lot uv pasties and it elps us to spot fings like that.
(with apologies to the politically correct !!!)
Janner Mac


Er, ere John!
Ew can ee be a Janner en if yer livin in Plymouth? Were ee born in the land of the golden pasty en?
(See i'm a Redruth boy meself)
Speak to ee drekly.

Jas.

Podie

46,630 posts

276 months

Friday 18th October 2002
quotequote all

John Mac said: Podie - Us is quite obsurvunt down ere cos us eats a lot uv pasties and it elps us to spot fings like that.
(with apologies to the politically correct !!!)
Janner Mac



Podie

46,630 posts

276 months

Friday 18th October 2002
quotequote all

Paceracing said:
Posh tart thinks she's called T-AR-N-I-A!



How much is that line worth in bribery!

Anyway - like I said, great to meet you both, and cheers for the hospitality! Take it you got the pics OK?

johno

8,428 posts

283 months

Friday 18th October 2002
quotequote all

Paceracing said: Johno,
:
Posh tart thinks she's called T-AR-N-I-A!

Er, ere John!
Ew can ee be a Janner en if yer livin in Plymouth? Were ee born in the land of the golden pasty en?
(See i'm a Redruth boy meself)
Speak to ee drekly.

Jas.



Ya a rummin ya r boouy !

Norfuuck'n good lad !





>> Edited by johno on Friday 18th October 11:08

Paceracing

729 posts

267 months

Friday 18th October 2002
quotequote all
Hehe,heheh,

Thanks Podie, you are welcolme to pop 'round anytime. I got the piccies okay, thanks very much!
Tania knows that I take the proverbial out of the way she pronounces her name and it pi55e5 her off, but it's funny anyway!

Jas.

Podie

46,630 posts

276 months

Friday 18th October 2002
quotequote all
Well, you are in Essex mate... so you HAVE to add an "r" after an "a".

eg: glaRss, graRss... geddit?