differences with a SEAC exhaust and a 350
differences with a SEAC exhaust and a 350
Author
Discussion

cdt

Original Poster:

537 posts

311 months

Monday 8th August 2005
quotequote all
How different is the SEAC exhaust to the 350 - it is just the straight through pipe instead of the back box and the tailpipe?

rev-erend

21,619 posts

313 months

Monday 8th August 2005
quotequote all
The centre box is suppossed to be straight thru - a single pipe exits the box the goes UNDER the back axle
and becomes 2 pipes then a single exit pipe.. No more silencers..

Hope I got that right..

jvaughan

6,025 posts

312 months

Monday 8th August 2005
quotequote all
Single centre box, twin pipes then go under the rear diff hanger and then twist up and out of the single tailpipe ( I believe the twin pipes are 1 1/2 Diameter )

cdt

Original Poster:

537 posts

311 months

Monday 8th August 2005
quotequote all
You can probably see the next question - would a SEAC exhaust fit on a 350 without any modification and would it sound fairly much the same as a SEAC?

gsx600

2,740 posts

277 months

Tuesday 9th August 2005
quotequote all
On my 400, I've got a single s/s sports silencer in the middle, a straight pipe out of the end to the rear of the car, and then a 90 bend to meet the original pipework that comes out of the rhs rear of car

Quite loud, about 115 db if I remember correctly

Cuts out all of the over axle pipe for a slightly smoother flow. All welded together to get rid of any U bolts that were scraping the floor as going under the axle gives it little ground clearance !