i think ive got to top up oil
Discussion
Also the viscosity will make a big difference.
Hot 0w 40 is very very runny.
You should expect 40psi at idle and up to 80psi on rev.
I do use a slightly thicker Oil but can’t remember the spec at the moment...
Also the thinner oils do run off the upper engine components quicker, this will make a big difference if you don't drive your car very often.
Hot 0w 40 is very very runny.
You should expect 40psi at idle and up to 80psi on rev.
I do use a slightly thicker Oil but can’t remember the spec at the moment...
Also the thinner oils do run off the upper engine components quicker, this will make a big difference if you don't drive your car very often.
cerealsurfer said:just read this forum ive been running my cerb on 0w 40 and ive only done 500miles since sept last year better drop the oil what should i be putting in chears daft dave
Also the viscosity will make a big difference.
Hot 0w 40 is very very runny.
You should expect 40psi at idle and up to 80psi on rev.
I do use a slightly thicker Oil but can’t remember the spec at the moment...
Also the thinner oils do run off the upper engine components quicker, this will make a big difference if you don't drive your car very often.
Gassing Station | Cerbera | Top of Page | What's New | My Stuff




