Bible no 3 - A prediction
Discussion
If anybody else is like me and want to do alot of the work yourself or take that tinkering a bit further , surely somebody like "Steve Heath" can come up with a more detailed Haynes like workshop manual with questions beginning with how to change ........... or how to remove ............, It's got to be a best seller and make someone a lot of money.
Perhaps we could document the jobs we do on our own cars and stick them on a web site? I've just uploaded a very basic page on how to clean the stepper motor as an example of what I mean.
www.car1.clara.co.uk/tvr/
Let me know what you think of the idea, I know the web site isn't the best you've ever seen, but a start maybe?
Hopefully the new issue of Steve's book will have more info on how to do jobs on the car, I believe it's got about twice as many pages as the old one.
Andy G
www.car1.clara.co.uk/tvr/
Let me know what you think of the idea, I know the web site isn't the best you've ever seen, but a start maybe?
Hopefully the new issue of Steve's book will have more info on how to do jobs on the car, I believe it's got about twice as many pages as the old one.
Andy G
OMG that was one dirty stepper motor , I clean mine quite often and I can honestly say it has never been that black .
You've now got me thinking that it probably doen't open properly and hence get dirty .
Anyone elses get that sooted or is really just mine that doesn't (serious question btw).
Harry
You've now got me thinking that it probably doen't open properly and hence get dirty .
Anyone elses get that sooted or is really just mine that doesn't (serious question btw).
Harry
Mine's never been that mucky. Someone who knows more will probably tell us it's running too rich or something ...
Also, after seeing a professional clean the stepper, you need to clean the bit inside to do a complete job of this - the stepper winds out in a phalic kind of way on a motor when the ECU tells it to. With the right diagnostic equipment you can remove the stepper, keep it wired to the loom and make it pop out to get to the rest of it. No I don't have this equipment.
T/.
Also, after seeing a professional clean the stepper, you need to clean the bit inside to do a complete job of this - the stepper winds out in a phalic kind of way on a motor when the ECU tells it to. With the right diagnostic equipment you can remove the stepper, keep it wired to the loom and make it pop out to get to the rest of it. No I don't have this equipment.
T/.
ajg said: Perhaps we could document the jobs we do on our own cars and stick them on a web site? I've just uploaded a very basic page on how to clean the stepper motor as an example of what I mean.
www.car1.clara.co.uk/tvr/
Let me know what you think of the idea, I know the web site isn't the best you've ever seen, but a start maybe?
Andy G
Just had a look at your website, this is the kind of thing we need , everyone should be issued with a digital camera, so we can log the events of each job to compile a huge online repair database. Back to that stepper motor, that's the dirtiest nipple i've ever seen , More information like what tools were required , what u used to clean your nipple and housing with ,did you need to use PTFE tape on insertion and say a 1 to 5 level of diffucultly scale.
HarryW said:
Anyone elses get that sooted or is really just mine that doesn't (serious question btw).
Harry
I've only cleaned mine twice in just over a year with about 8000 miles covered, the first time i cleaned it was about a month after purchase and it was sooted up, i started using optimax when it came available for 98% of the time after that, the stepper motor has stayed clean for the last 6 months, maybe it's to do with the petrol less soot deposits or something, also the exhaust went from black to a proper greyish colour.
HarryW said: Anyone elses get that sooted or is really just mine that doesn't (serious question btw). Harry
I cleaned mine recently ('96 car) and it was as dirty as that one. I suspect mine had never been cleaned before as the cable tie looked original and was over the plug clip and therefore would have needed removing in order to remove the plug.
qube said:
Just had a look at your website, this is the kind of thing we need , everyone should be issued with a digital camera, so we can log the events of each job to compile a huge online repair database. Back to that stepper motor, that's the dirtiest nipple i've ever seen , More information like what tools were required , what u used to clean your nipple and housing with ,did you need to use PTFE tape on insertion and say a 1 to 5 level of diffucultly scale.
Thanks for your comments about the website idea, I'll add some more info, also add some more jobs as and when I do them (plenty of jobs to do on the car!)
Has anyone else got info on jobs they have done?
Anyway, all this talk of dirty nipples, I'll have to go and have quick rub down with an oily rag
Andy G
It is more comprehensive... 250,000 words and some 700+ illustrations more comprehensive. To put in context the electronic material for this book comes to 13.7 Gbytes.
However if you need pictures and a 20 page descrption of how to clean a steeper motor, then I am not sure how you are going to cope with the more complex stuff in the book...
However if you need pictures and a 20 page descrption of how to clean a steeper motor, then I am not sure how you are going to cope with the more complex stuff in the book...
like the idea of website and haynes style manual, incidentally had my stepper motor out after advice to my question last week, the housing had cracked on mine nearly all the way round just behind the threads, anyway replaced and running well now.
Thanks to everyone who posted the stepper advice aswell,
cheers
Thanks to everyone who posted the stepper advice aswell,
cheers
shpub said: It is more comprehensive... 250,000 words and some 700+ illustrations more comprehensive. To put in context the electronic material for this book comes to 13.7 Gbytes.
13.7 Gbytes for only 250,000 words and 700+ illustrations sounds strange seeing that you can get the whole set of the encyclopedia britannia on one dvd disc that only holds 4.7 Gbytes, Umm must be big writing or 3d holographic illustrations can't wait to see that one, or back it up either.
No i don't need 20 pictures to clean the stepper motor as i know how to clean it, but there are other people who don't know what or where it is and these people find looking at well documented illustrations with text helpful isn't that what books or html pages are for ?, as for complex stuff that's the problem nothing defined, not even the firing order, and the impossible task of keeping the coolant level 2" below the top of the expansion tank (i can't see 12 litres expanding into 2" can you) blew one rad already for sticking to that, take a look at the replies other people seem interested ?.
>> Edited by qube on Thursday 24th October 08:39
>> Edited by qube on Thursday 24th October 08:59
heliox said:
Perhaps Ted could invent a "TVR Technical" section which could include routine maintenance tips,photos etc.Im sure it would be very popular.
Nice idea, but has Ted got room on this site for what may become a workshop manual (or a better version) for all models ? I hope so
Gassing Station | Chimaera | Top of Page | What's New | My Stuff