Minor exhaust repair

[damnfinechim]

Howdy guys,

I have a couple of little holes (pin prick sized) at the rear end of my exhaust - right where that brace strut/stabiliser arm just behind the diff as it splits and comes out the rear.

Looks like the weld has come apart slightly due to vibration. If I take it to any joe exhaust place they will be able to fix her up without any problems I assume?

Wont be taking it in till saturday but thought I should seek some braniac advise on here first.

Ta v muchly

Kempy

[chim666]

If the holes are easy to get to (i.e. not right against a bracket or something) why not try Mr Heath's tip as per The Bible, and buy yourself a can or two of pop and (after drinking the pop ) cut open the cans, stick some exhaust repair stuff on the inner surface and secure them around the pipes using a couple of large jubilee clips.

>> Edited by chim666 on Tuesday 23 August 17:11

[DamnFineChim]

chim666 said:

If the holes are easy to get to (i.e. not right against a bracket or something)

Unfortunately, thats exactly where that are. Right on the welding join on the rear bracket. Thanks for the tip though chim666.

[DamnFineChim]

chim666 said:

If the holes are easy to get to (i.e. not right against a bracket or something)

Unfortunately, thats exactly where that are. Right on the welding join on the rear bracket. Thanks for the tip though chim666.