Graphite powder
Author
Discussion

Riley26

Original Poster:

307 posts

146 months

Tuesday 26th December 2023
quotequote all
Hi does anyone know any where on the high street that sells this? I have a sticking lock. Thank you

otolith

68,910 posts

233 months

Tuesday 26th December 2023
quotequote all
B&Q maybe - you can check stock at your local store online.

https://www.diy.com/departments/home-secure-graphi...

Ah, no, online only. I see your problem.

sparkythecat

8,097 posts

284 months

Tuesday 26th December 2023
quotequote all
How much do you need?
Makeshift mortar and pestle and some pencil leads might do it.

Dogwatch

6,381 posts

251 months

Tuesday 26th December 2023
quotequote all
Silicon lubricant aka dry lube? Proper lubricant as distinct from WD40.

underwhelmist

2,050 posts

163 months

Tuesday 26th December 2023
quotequote all
I think I got mine from Halfords - maybe in the cycling department?

Riley26

Original Poster:

307 posts

146 months

Tuesday 26th December 2023
quotequote all
It's for a sticking lock on my car

Chris32345

2,141 posts

91 months

Tuesday 26th December 2023
quotequote all
Carpenters pencil replacement leads
And then crush them up to make your own?

Riley26

Original Poster:

307 posts

146 months

Tuesday 26th December 2023
quotequote all
Is it alot better then silicone spray?

GreenV8S

31,018 posts

313 months

Tuesday 26th December 2023
quotequote all
I last got some from a local sports shop where they were selling it as a lubricant for skateboard wheel bearings. You could try phoning around in your area to see if anyone still stocks it. If it was me, I'd just go with the times and buy it online.

legless

2,037 posts

169 months

Tuesday 26th December 2023
quotequote all
Just use some GT85 spray. IME it tends to work better than graphite anyway.

Caddyshack

14,844 posts

235 months

Tuesday 26th December 2023
quotequote all
Amazon, type graphite, it arrives.

tux850

1,956 posts

118 months

Tuesday 26th December 2023
quotequote all
sparkythecat said:
How much do you need?
Makeshift mortar and pestle and some pencil leads might do it.
Pencil lead has clay in it too which isn't good for locks and simar mechanisms.

Caddyshack

14,844 posts

235 months

Tuesday 26th December 2023
quotequote all
legless said:
Just use some GT85 spray. IME it tends to work better than graphite anyway.
I have recently discovered WD40 with Silicone, it seems pretty good for cleaning something and leaving behind an aid to lubrication.

Riley26

Original Poster:

307 posts

146 months

Tuesday 26th December 2023
quotequote all
Thanks I'll probably just try the gt85 spray is easier to get hold of.

finlo

4,453 posts

232 months

Tuesday 26th December 2023
quotequote all
How were you planning on getting this graphite powder into the lock?

PlywoodPascal

5,974 posts

50 months

Tuesday 26th December 2023
quotequote all
It comes in a little squirty/puffy bottle

Graphite is better than gt85 because it doesn’t dissolve any grease out of the lock.

B and q https://www.diy.com/departments/home-secure-graphi...


E-bmw

13,411 posts

181 months

Wednesday 27th December 2023
quotequote all
PlywoodPascal said:
It comes in a little squirty/puffy bottle

Graphite is better than gt85 because it doesn’t dissolve any grease out of the lock.

B and q https://www.diy.com/departments/home-secure-graphi...
It also doesn't leave any oily residue to collect dust/grit etc.

Any double glazing place should sell it.

B & Q sell it.

Many good hardware shops will sell it.

Belle427

11,886 posts

262 months

Wednesday 27th December 2023
quotequote all
I've always used the spray 3 in 1 oil.
Can't recall the last time I had a lock problem, maybe on my old Mk1 Astra!

spikeyhead

20,433 posts

226 months

Thursday 28th December 2023
quotequote all
I've always rubbed the key with a pencil and wiggled it in the lock a little

Rinse and repeat until the lock is behaving again.

That technique has never failed me