Pre-bent mild steel exhaust bends

[oto]

Can anyone recommend a place where I can buy some pre-bent bends and some oval tubing in MILD STEEL? Needs to be 2.5" or mm equivalent. Online or West Mids/Staffordshire.

Thanks

Oto

Edited by oto on Tuesday 13th February 19:27

[paintman]

https://jetex.co.uk/custom-exhaust-parts/

[poppopbangbang]

Custom Chrome in Nuneaton - https://custom-chrome.co.uk/, might be easiest to pop down as they've got a pretty serious stock of bits.

Oval is always more tricky but if you only need a short length to clear a cross member or similar they can probably press you something whilst you wait.

[chippy348]

oto said:

Can anyone recommend a place where I can buy some pre-bent bends and some oval tubing in MILD STEEL? Needs to be 2.5" or mm equivalent. Online or West Mids.

Thanks

Oto

Used these quite a lot

https://exhaustpartsuk.com/product-category/mandre...

They off the Pleck road in Walsall, i usually go in and see them as they have a lot more than listed on the website

[oto]

Thanks guys