500 mystery button

500 mystery button

Author
Discussion

Rudy96

Original Poster:

4 posts

12 months

Sunday 10th March
quotequote all
Hi all,

Looking for some help on a button I found while working on fitting a new dash .
The button was tucked in behind the dash. To me it looks part of the original loom . Any ideas ?????

sixor8

6,293 posts

268 months

Sunday 10th March
quotequote all
I've had several TVRs and not had a switch marked that way. Perhaps somebody wired in a supply to the radiator fan relay to manually turn them on?

Or perhaps it was a extra immobiliser switch hidden somewhere when in use (not behind the dash obs smile ), if the OE alarm / immobiliser had failed.

Rudy96

Original Poster:

4 posts

12 months

Sunday 10th March
quotequote all
Thanks for the info . What seems strange is it looks original or professionally done.

I’ve already found an additional button for isolating the ignition.
Stupidly the first thing I did when I found it was flick it on and off. So I don’t know what position it was in 🤔.
I try and route it to the glove box, so I can see what it does.

Griffithy

929 posts

276 months

Sunday 10th March
quotequote all
Maybe radiator fan or dashlight switch.

sixor8

6,293 posts

268 months

Sunday 10th March
quotequote all
The dashboard lights switch is a push / latch switch, as are the heated seats (if fitted). That's an on / off type (if that's the terminology). smile

Belle427

8,960 posts

233 months

Monday 11th March
quotequote all
Maybe a cigar lighter? wink

Englishman

2,220 posts

210 months

Monday 11th March
quotequote all
What happens when it is off?

eliot

11,433 posts

254 months

Monday 11th March
quotequote all
I've seen a switch like that fitted to a 500 that for turning off the inductor pickup for the speedo smile

Classic Chim

12,424 posts

149 months

Monday 11th March
quotequote all
Inductor pick up, so the speed sensor at the Dif end?
Resulting in no mileage being recorded, is that how I read that?

eliot

11,433 posts

254 months

Monday 11th March
quotequote all
Classic Chim said:
Inductor pick up, so the speed sensor at the Dif end?
Resulting in no mileage being recorded, is that how I read that?
yep.
Is it a blue 500, n reg?

LucyP

1,699 posts

59 months

Monday 11th March
quotequote all
Can't the OP just press the button and see what stops working? It could be anything. It clearly isn't a factory standard fit. What is the big deal about just trying it if the OP is so curious? It isn't some James Bond car with a self-destruct button, or sets off stinger missiles, hidden behind the headlights is it?

Harvy500

184 posts

10 months

Monday 11th March
quotequote all
LucyP said:
Can't the OP just press the button and see what stops working? It could be anything. It clearly isn't a factory standard fit. What is the big deal about just trying it if the OP is so curious? It isn't some James Bond car with a self-destruct button, or sets off stinger missiles, hidden behind the headlights is it?
It's for an ejector seat.
And, I thought the same. Start the car (at least put the ignition on) flick the button and see what does/doesn't work.


Classic Chim

12,424 posts

149 months

Tuesday 12th March
quotequote all
Hmmmm. Personally I’d trace the wiring before pressing that switch.
As this is not standard on any Tvr and not many people local can assist with Tvr wiring issues you are taking a blind chance by pressing that button.
It might be a basic and prudent move to trace the wiring first.
You need to know these cars very well to detect or find electrical faults and just consider, if that buttons for a sinister purpose someone might have clipped the wires back to avoid detection which should make it dead but it might also be live dangling around somewhere. Unlikely I know but in situations like these you have no idea unless you trace it.

I have a saying which served me very well with my Tvr over the years which is simply
Plan for the worst but hope for the best, it’s neatly always the later which is probably the case here.

A basic check around the parts of the car this button could be connected to might be the easiest way to see if there’s any alien wiring coming from those areas.

I notice the o/p mentioned we was going to trace it through the glove box which is the correct thing to do.




Edited by Classic Chim on Tuesday 12th March 06:48

blueg33

35,904 posts

224 months

Tuesday 12th March
quotequote all
If the car works, I would tuck that switch behind the dash and forget about it.

Mess with it and the law of unintended consequences will apply.

eliot

11,433 posts

254 months

Tuesday 12th March
quotequote all
What’s this button do…..

Classic Chim

12,424 posts

149 months

Tuesday 12th March
quotequote all
Hahaha smile

The theory of tucking it away and carrying on is a good one but I’d be forever wondering wtf it was.
It could be wired to the immobiliser close by as a by pass tool or pretty much anything else you can think of.



RayTVR

1,040 posts

143 months

Tuesday 12th March
quotequote all
I have the same tucked away behind the dash. It's from the Meta alarm and immobiliser. If you need to disable the immobiliser using the red code you use that switch in a sequence with the ignition (or something like that).

hide it away and forget it if its working.

blueg33

35,904 posts

224 months

Tuesday 12th March
quotequote all
Classic Chim said:
Hahaha smile

The theory of tucking it away and carrying on is a good one but I’d be forever wondering wtf it was.
It could be wired to the immobiliser close by as a by pass tool or pretty much anything else you can think of.
I discovered with the Tuscan that the old adage "if it ain't broke, don't fix it" definitely applies

Classic Chim

12,424 posts

149 months

Tuesday 12th March
quotequote all
RayTVR said:
I have the same tucked away behind the dash. It's from the Meta alarm and immobiliser. If you need to disable the immobiliser using the red code you use that switch in a sequence with the ignition (or something like that).

hide it away and forget it if its working.
That’s good to hear.
What years your car please.

blueg33

35,904 posts

224 months

Tuesday 12th March
quotequote all
Classic Chim said:
RayTVR said:
I have the same tucked away behind the dash. It's from the Meta alarm and immobiliser. If you need to disable the immobiliser using the red code you use that switch in a sequence with the ignition (or something like that).

hide it away and forget it if its working.
That’s good to hear.
What years your car please.
His profile says a V8S