Mallory Distributor in a Rover v8

[eltax91]

Hello all

I'm retoring a 1992 Range Rover classic LSE. It has fitted an upgraded mallory distributor by a previous owner and I'm struggling to track down a HT lead set for it.

It looks like the below imagine and the part number is worn away towards the end. It appears to be 426460002, or could end 8002 or 8802.



Does anyone know what type of connectors these are and if it's possible to buy and off the shelf lead set?

[P100]

Give Phil a call at Magnecore, he is able to custom make you a set.

[miniman]

Anything here? They look like you need a lead where both ends are identical, and match the ends that typically fit the plugs, if you see what I mean.

https://www.holley.com/brands/mallory/products/ign...

[some bloke]

Most Chev HEI distributors have a similar terminal, if you're not worried about 100% accuracy.

[eltax91]

P100 said:

Give Phil a call at Magnecore, he is able to custom make you a set.

Thanks. They are fairly local to me. At least only a 10 min drive away from somewhere i travel to weekly. I have dropped them an email.