Info needed

[alex s]

Last night i noticed that my speedo light has blown/stoped working, I assume as all the others are working it is just the bulb, so....the question is, how do i go about changing it, is it a easy job or is it a pain in the arse?
Not too bothered as i have a road angel for speed, also dont drive it much in the dark.
any advice welcome( well constructive advice that is!!)
Alex

[V6GTO]

You can bet your bottom dollar it'll be on Justin's site. Look on his profile for the address.

Martin.

[silversix]

Pretty simple, if you've got bendy hands. just undo both of the "knurled" nuts on the back of the speedo, and it pulls straight out. it's fidly more than difficult, and you'll probably end up with grazed knuckles. I did mine as the bulb was blown when I bought it, and couldn't be bothered with the 100 mile round trip to the dealer to get it fixed. Should take about 5 minutes.

[alex s]

Thanks guys.
Alex

[broad]

Just to add to silversix's post - once you remove the knurled nuts a squared U'shape bracket needs to be pulled off the studs. Remember how it comes out as space is restrictive and it needs manipulating around the wiring behind the dash.

When pushing the speedo back in make sure the O'ring behind the bezel has not become twisted and check it as you push the speedo in.

G