Indicator stalks
Discussion
Heres the pics.... or not??
If you get them from a TVR dealer, make sure they supply them with the little grub screw to hold them in place (while the glue is drying).
They are also the same fitment as Lotus Elise stalks and I know you can get quite a few different designs for these. May be worth searching ebay or lotus elise sites (they will obviously look good but wont perform aswell
)
regards
Lig.
>> Edited by lig on Friday 14th October 17:15
>> Edited by lig on Friday 14th October 17:16
>> Edited by lig on Friday 14th October 17:17
If you get them from a TVR dealer, make sure they supply them with the little grub screw to hold them in place (while the glue is drying).
They are also the same fitment as Lotus Elise stalks and I know you can get quite a few different designs for these. May be worth searching ebay or lotus elise sites (they will obviously look good but wont perform aswell
) regards
Lig.
>> Edited by lig on Friday 14th October 17:15
>> Edited by lig on Friday 14th October 17:16
>> Edited by lig on Friday 14th October 17:17
Or for something similar you could have a punt on these:-
http://cgi.ebay.co.uk/TVR-or-LOTUS-VAUXHALL-INDICATOR-WIPER-STALKS_W0QQitemZ4581685920QQcategoryZ108792QQrdZ1QQcmdZViewItem
Paul
http://cgi.ebay.co.uk/TVR-or-LOTUS-VAUXHALL-INDICATOR-WIPER-STALKS_W0QQitemZ4581685920QQcategoryZ108792QQrdZ1QQcmdZViewItem
Paul
Hey Sam & Liggit, finally got my indicator stalks and column adjust lever fitted. Cheers for the help and contacts Liggit. Dead easy to fit.
Before
after
and
What do you reckon?
P.s. If anyone else would like the Tuscan stalks ask for Jim in parts at Harrogate Horseless Carriages 01423 561666.
>> Edited by Baldy67 on Thursday 15th December 16:07
Before
after
and
What do you reckon?
P.s. If anyone else would like the Tuscan stalks ask for Jim in parts at Harrogate Horseless Carriages 01423 561666.
>> Edited by Baldy67 on Thursday 15th December 16:07
I recently bought and installed stalks I bought off ebay - the same ones The Surveyor has a link to.
If anyone is considering these don't be put off by the crappy photo, they are very good and look just the same as those on Baldy67's pictures.
I paid £26 for the pair.
If anyone wants to know how I installed them (as usual, its dead simple when you know how) or what they look like I am happy to help.
If anyone is considering these don't be put off by the crappy photo, they are very good and look just the same as those on Baldy67's pictures.
I paid £26 for the pair.
If anyone wants to know how I installed them (as usual, its dead simple when you know how) or what they look like I am happy to help.
lig said:
Hi Baldy,
What a fine job!!
I also like your steering wheel. Where did you get that polished or did it come like that??
Cheers Lig. I first saw a steering wheel like it at one of the meets and asked the guy how he'd done it. He said he'd used Wet and Dry so i thought i'd have a go, but also thought there must be an easier way (wrong!!), as i tried a little dab of paint stripper on the back of the wheel, this didn't even mark the paint, so a thick dab left for a bit, still didn't even mark it. I tried using a Dremill which fetched the paint off but i wouldn't recomend as it's a bit too coarse on the curvey bits. I eventually gave in and resorted to Wet and Dry, 4 hours later and fingers blistered but worth it came out as above. Just pop the badge off from the back and peel the leather back slightly and glue back down when finished.
Baldy.
Gassing Station | Griffith | Top of Page | What's New | My Stuff