TVR Chimaera lights don’t work now

[Adamalfa]

Hi Guys, any advice gratefully received. I have my dash out on a 95 Chim and was upgrading the gauge lights to LED’s. I put a couple in and all seemed well but by the time I got to the water temp gauge the led didn’t illuminate. I put the old bulb back in and that worked, tried the led again but no joy, tried the rest and nothing. Now I have no dash lights, no side lights or headlights or fog light. I have checked fuses for headlights and dash lights and they are not blown. I’m very confused as to what I’ve done wrong by putting a couple of LEDs in? Oh and the led kit didn't include the right bulb for the clock either which is very small. Any pointers? Thanks in advance

[citizen smith]

Have you accidentally pressed the dash board light button - under the dash to the left hand side of the steering column.

[sixor8]

I did this a few years ago, the clock size I needed on a '96 Chimaera was size BA7s. It was a bigger filament a few years later, my '97 Cerbera, it was BA9s.