Help. Car cuts out when aircons switched on.
Discussion
Mark, when did you get a Cerb (and do you still have the Chim ?)
Erm, right, back on subjext - sounds like the ECU isn't adjusting the idle to compensate the load from the AC compressor - have you had a laptop plugged into the ECU recently to check for fault codes ? I'd say check throttle pots & reset adaptive maps to start with (10mins work with a laptop & a flat head screwdriver)
Erm, right, back on subjext - sounds like the ECU isn't adjusting the idle to compensate the load from the AC compressor - have you had a laptop plugged into the ECU recently to check for fault codes ? I'd say check throttle pots & reset adaptive maps to start with (10mins work with a laptop & a flat head screwdriver)
Hello Olly. Ive had the Cerbera five months.Sold the Chimaera to DamFineChim.The Cerbera has had a lot of engine modifications done to it.Its running an MBE systems E.C.U.I dont know if this is a factory unit? do you know of any one with a laptop that can do the kind of adjustments i need? Cheers. Mark
MBE is the standard ECU....
I've got laptop, software & cable & can check pots & error logs.....
There are quite a few people on here now with the software, so I would suspect there is someone more local than me than can check it for you ???
Mine is now idleing too low (keeps stalling) & I can't work out how to knock the idle back up, so perhaps I should get some more "lessons" before messing up your car !
I've got laptop, software & cable & can check pots & error logs.....
There are quite a few people on here now with the software, so I would suspect there is someone more local than me than can check it for you ???
Mine is now idleing too low (keeps stalling) & I can't work out how to knock the idle back up, so perhaps I should get some more "lessons" before messing up your car !

BLUETHUNDER said:
Just checked paper work from previous owner.Had Tuscan race cams and an E-prom upgrade plus a few other bits and pieces to the tune of £4,000,carried out by TVR power on the 12/12/04.
Gulp !!! I guess his old cams must have been shot to want to bother at that price.
Could have bought a 4.5 and got an Austec or Trackcar set up !
Gassing Station | Cerbera | Top of Page | What's New | My Stuff




