The bezel fell off my Rolex Submariner!
Discussion
Had it for nearly 23 years since new, yesterday I knocked it on the corner of a table and the bezel pinged off.... Luckily I was inside the house so could easily find the bezel itself and the ring that goes inside, to my relief it just clicked back into place...
However it now rotates in both directions and does not "click" anymore, has anybody come across this, any fix or have I lost a piece/spring?
Thanks
Phil
You've lost the click spring, Phil 
See how the inside of the bezel was sort of serrated?
Pop the bezel back off, and the friction washer, and look carefully round the crystal retaining ring and you'll see a little hole and relief.
That is where the click spring goes. Guessing it is a 16610 or derivative so: https://www.ebay.co.uk/itm/256865841001
First genuine one I saw on a quick "16610 Click Spring" ebay search but you can probably find cheaper/more local.
Now you've put it back together, you'll easily be able to disassemble and reassemble yourself with the new click spring

See how the inside of the bezel was sort of serrated?
Pop the bezel back off, and the friction washer, and look carefully round the crystal retaining ring and you'll see a little hole and relief.
That is where the click spring goes. Guessing it is a 16610 or derivative so: https://www.ebay.co.uk/itm/256865841001
First genuine one I saw on a quick "16610 Click Spring" ebay search but you can probably find cheaper/more local.
Now you've put it back together, you'll easily be able to disassemble and reassemble yourself with the new click spring

Gassing Station | Watches | Top of Page | What's New | My Stuff